Specifications

Prism Media Products Limited AD-2 Dual-rate A/D converter
Operation Manual
Issue 0.2 © Prism Media Products Limited
11 August 1998 Page 14 of 58
At this point, if you have not already saved any configurations to user stores, all of the
store LEDs above buttons <1> to <4> will be flashing.
If you do not wish to store your setup, simply press [Enter], ignore the prompt to select
a store and press [Enter] again. You will see:
Setup not
Saved
Then press [Enter] to finish.
If you wish to store your custom setup, press one of the 4 store buttons; you can
overwrite an existing store if you wish - in this case you could select one that was not
flashing.
You will then see:
Setup saved as
xxxxxxxxx by Wzd
Press [Enter] to finish and return to the normal level display.
You may then wish to modify the setup such as to set an alternative function and output
connector for the Auxiliary output.
Do this by using the [99] and [Enter] keys to select the relevant menu or sub-menu;
edit/change the parameter with the [77] and [66] keys and confirm the new selection with
[Enter].
For more details see section 4.6.