Specifications

Prism Media Products Limited AD-2 Dual-rate A/D converter
Operation Manual
Issue 0.2 © Prism Media Products Limited
11 August 1998 Page 25 of 58
A default store description will be displayed in the top line of the display with a prompt
to continue, such as:
A-D User #1 ;note: the first character will be flashing
[fns] Enter=End
Step A Optional : You may clear the description or
select the default by pressing the [77] key. The
[77] and [66] keys are used to move the character
edit cursor along the display. There are two
additional positions which can be visualized as
being between the two ends of the display.
These correspond to two functions which are :
Deflt and Clear
The function (if selected) will be displayed on the bottom line of the
display. To activate the function press [99] or [88]. To abort the edit at any
time while changing the description double press any store button <1> to
<4> or <Setup Wizard>.
Step B You will be presented either with a text description with the first character
flashing, or with a blank string with a flashing cursor in the first character
position.
Move the cursor to the desired position using the [77] and [66] keys.
Step C Edit the character using the [88] and [99] keys. The character is selected
from a list of ASCII characters shown in the table below. Hold down the
edit keys to auto-repeat and search quickly for the desired character.
Step D Repeat Steps B & C until the desired description has been set.
Step E Press [Enter] to finish editing the description.
Step F Press [Enter] again to Save the store. Alternatively, press [88] or [99] or
the button under flashing store LED to cancel the store operation [or
double press any other store button <1> to <4> or <Setup Wizard>.]