Specifications

Prism Media Products Limited AD-2 Dual-rate A/D converter
Operation Manual
Issue 0.2 © Prism Media Products Limited
11 August 1998 Page 28 of 58
4.6.2.2. Parameter selections
These display the parameter description and current setting.
Example:
Mode: A-D ; this allows setting of A-D or D-D mode, and
A-D D-D ; shows that A-D is selected.
The A-D on the top line is the current setting. On the bottom line is the set of
choices. The current position of the selection cursor is indicated by the selection
flashing (in the example above this is indicated by a double underline: A-D). If
there are more than can be accommodated on the display then the [77] and [66]
keys can be used to move the selection cursor and to scroll the list. This is
indicated by 6 and 7 at the ends of the display.
4.6.3. Changing the settings
When you have found the parameter that you want to change, use the [77] and [66] keys
to select the setting that you want.
Most AD-2 settings require confirmation of the change by pressing [Enter]. You will see
that the new setting is then displayed on the first line of the display. You can then
reverse out of the menus with [88] or wait for the unit to time out [or double-press any
store button <1> to <4>, or double-press the <Setup Wizard>].
Settings that do not require confirmation are :
" All of sub-menu A-D Mode Setup
- Peak input level (headroom limit)
- Left and Right channel gain trims
" In sub-menu Preferences
- LED Brightness
- LCD Backlight brightness
- LCD Contrast