Specifications

Prism Media Products Limited AD-2 Dual-rate A/D converter
Operation Manual
Issue 0.2 © Prism Media Products Limited
11 August 1998 Page 57 of 58
10. ELECTROMAGNETIC COMPATIBILITY
This equipment is intended for use in an electromagnetically controlled environment. To
maintain the performance specification it should not be subject to strong magnetic
fields (such as in the immediate vicinity of a power amplifier or cathode ray tube) and all
connections should be terminated as described in the relevant sections of this manual.
This is also required to ensure that emissions are within applicable norms and that it
does not interfere with other equipment.
All coaxial connections should be made using a properly screened 75S cable with the
screen connected to the outer of the connector at both ends. All XLR connections
should use a screened twisted pair cable with the screen connected to pin 1 of the XLR
connector at both ends. In the case of the digital XLR connections this cable should be
of 110S impedance.