Specifications

Prism Media Products Limited AD-2 Dual-rate A/D converter
Operation Manual
Issue 0.2 © Prism Media Products Limited
11 August 1998 Page 58 of 58
11. REFERENCES
[1] AES3-1992 - ` Recommended Practice for Digital Audio Engineering - Serial Transmission Format for Two-Channel
Linearly Represented Digital Audio Data' J. Audio Eng. Soc., Vol 40 No. 3, pp 147-165 (June 1992)
[2] AES11-1991 - `AES Recommended Practice for Digital Audio Engineering - Synchronization of Digital Audio
Equipment in Studio Operations' J. Audio Eng. Soc., Vol. 39 No. 3, pp 155-162 (March 1991)
[3] AES17-1991 - `AES Standard Method for Digital Audio Engineering - Measurement of Digital Audio Equipment' J.
Audio Eng. Soc., Vol. 39 No. 12, pp 961-975 (December 1991)
[4] IEC958 - `Digital Audio Interface' International Electrotechnical Commission 1989
[5] Julian Dunn, Barry McKibben, Roger Taylor and Chris Travis - `Towards Common Specifications for Digital Audio
Interface Jitter' Preprint 3705, presented at the 95th AES Convention, New York, October 1993
[6] Julian Dunn and Ian Dennis - `The Diagnosis and Solution of Jitter-Related Problems in Digital Audio Systems'
Preprint 3868, presented at the 96th AES Convention, Amsterdam, February 1994.
[7] AES-3id-1995 - `AES information document for digital audio engineering - Transmission of AES3 formatted data by
unbalanced coaxial cable' J. Audio Eng. Soc., Vol. 43 No. 10, pp 827-844 (October 1995)
[8] Draft AES3-1992 Amendment 3-xxxx - Serial Transmission Format for Two-Channel Linearly Represented Digital
Audio Data' (still in preparation, July 1998)
FURTHER INFORMATION
Enquiries about this product should be addressed to :
Prism Media Products Limited
William James House
Cowley Road
Cambridge
CB4 0WX
UK
Phone: [phone]
Fax: [phone]
Email : [e-mail]
Web: http:\\www.prismsound.com