www.prismatibro.se

2:8 FIND STORED DOCUMENTS
To nd stored documents you should follow the procedure below;
•
Start the instrument by pressing OK, accept date/time with OK
•
The display will ask NEW DOCUMENT?
•
Pressing the right > arrow the display will move to FIND STORED DOCUMENT,
press OK
•
The display will now ask you to choose DOCUMENT NR.
•
Using the right > arrow key, you move to the required document, then
press OK.
•
The display now shows READ DOC (see section 2:10), continue to use the
left < arrow key, the next display will show EDIT DOC (see section 2:9),
next, RETURN TO BASE, next FIND OTHER DOCUMENTS, and DELETE DOC
(see section 2:11).
2:9 EDIT DOCUMENTS
This menu allows you to recover and view previous measurements, or continue to
measure incomplete data. Follow section 2:8 above until EDIT DOC is displayed,
press OK, then proceed as described in section 2:5.i
2:10 READ DOCUMENTS
This menu enables you to check previous measurement values.
Follow section 2:8 until READ DOC is displayed, press OK.
Select the cylinders you wish to check using < or > buttons
When all positions are checked the display will ask NEXT CYLINDER?
When all cylinders have been viewed the display will ask READ DOC DONE, press OK.
The display will now ask FIND OTHER DOCUMENTS.
Should you want to return to base, use right > arrow key for RETURN TO BASE, press OK.