www.prismatibro.se
1. GENERAL INFORMATION
This manual provides the basic information required to operate the PC program
together with the Crankshaft Deection Indicator Prisma DI-5C.
The program can be used in • Windows 98 • Windows Millenium
• Windows 2000 • Windows XP
• Windows NT • Windows Vista
• Windows 7 • Windows 8
Peripheral information such as Ship/Plant names and comments may be added at the PC.
Should a measurement contain faults, it is possible to manually correct it in the program.
Even the standard Prisma DI-5 model can use this program since all measurement input
can be done manually, box by box, cylinder by cylinder. Then all the program functions
may be used, just as if the data was transferred from a Prisma Prisma DI-5C.
2. INSTALLING THE PC PROGRAM
The Prisma DI-5C is supplied with CD-rom containing the program.
Follow these steps for installation:
1. Load the CD into your PC.
2. Connect the Prisma DI-5C and follow the wizard to install USB driver from the CD.
3. Install the software by opening the Start/ Run menu and enter
D:\DI5C-application\SETUP.EXE
Click OK and follow the wizard for installation.
NOTE!
If problems occour to install Software for Prisma DI-5C PC application on
Windows Vista, Windows 7 or Windows 8 use this work around:
1. Click on the “DI5C appl for 64 bit windows” and open the compressed le.
2. Save the le and folder structure to your program folder “c:\program les”
3. Open the folder called; C:\Program Files\Prismateknik\DI-5C PC Program and
“right-click” on the le called DI5C and choose attach to startmeny.
4. Attach the instrument to your USB port the drivers please use
the” winXp, vista-driver” folder to nd the right driver for the DI-5C instrument.