User Manual

Table Of Contents
Change the NFC settings
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > More > NFC.
3. If necessary, turn on the NFC switch.
4. Do any of the following:
To accept file transfers automatically, turn o the Prompt before receiving switch.
To allow transactions when the backlight is
o, turn on the Allow when screen is o switch.
To allow transactions when your device is turned o, turn on the Allow when device power is o switch.
To turn
o the Android
Beam feature, turn o the Android Beam switch.
To turn o NFC, turn o the NFC switch.
About tap and pay
When NFC is turned on, you can tap the back of your device to an NFC payment terminal to pay for your purchase.
If you have more than one payment app installed on your device, when you tap to pay for a purchase, you pay using the app
that is set as the default. You can change which app is used as the default. If you want to use another payment app for
some transactions, you can set the tap and pay feature to use the payment app that is open in the foreground instead.
Change the payment settings for tap and pay
Make sure that NFC is turned on.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > Tap & pay.
3. To change the default app, tap Payment default. Tap an app, and then tap OK.
4. To use other payment apps for some transactions, tap Use default > Except when another payment app is open.
Tethering and mobile hotspot mode
Internet tethering
Internet tethering allows another device, such as a laptop or tablet, to share your device's connection to the mobile
network. You can connect the other device to your BlackBerry device using a USB cable or, if both devices are Bluetooth
enabled, you can use Bluetooth technology instead.
Additional charges might apply for using Internet tethering.
User Guide Settings
76