SDS

Page 1/5
Safety Data Sheet
according to 1907/2006/EC, Article 31
Date Printed: 03/23/2015 Date Reviewed: 03/11/2015Version 2
40.0
1: Product Identification
·
Product Name:
Formolene® High Density Polyethylene-Hexene Copolymer
·
Synonyms:
HDPE-H Copolymer
·
Product Code:
HB4----, HB5----, HL5----, HF3----, HL3----
·
CAS Number:
25213-02-9
·
Product Use:
Resin, extrusion and compounding, plastic molding, molded articles, films and coatings.
·
Manufacturer/Supplier:
Formosa Plastics Corporation, Texas
201 Formosa Drive
Point Comfort, TX 77978 USA
[phone]
E-Mail: [e-mail]
·
Business Division:
High Density Polyethylene
·
Emergency Telephone Number:
In case of a chemical emergency, contact CHEMTREC (24 hrs) at:
[phone] (United States, Canada, Puerto Rico, Virgin Islands)
[phone] (International & Maritime)
2: Hazard(s) Identification
·
Hazard Classification:
The product is not classified according to the Globally Harmonized System (GHS) for classification and
labeling of chemicals.
.
·
Other Hazards:
Molten material may cause thermal burns.
·
Signal Word:
Not Applicable
·
NFPA Ratings (scale 0 - 4):
0
1
0
Health = 0
Fire = 1
Reactivity = 0
·
Additional Information:
If you do not understand the hazards or safety precautions described in this data sheet, contact your
supervisor or safety administrator before handling this product.
3: Composition/Information on Ingredients
·
Chemical Characterization: Substances
·
CAS No. Description
25213-02-9 ethylene-hexene copolymer
FPC
(Contd. on Page 2)