Technical Specifications

EZ
™
Slats
Decorative Privacy Fence Slats
EZ Slats are fast, easy to install bottom locking, single
wall slats. They are also one of the least expensive,
chain link enhancement products available on the
market today. The single wall “M” shaped slat will give
you the visual screening and color enhancement you
desire at a very affordable price.
Features and Benefits
Materials – Slats are extruded from High Density Polyethylene
(HDPE), color pigments and ultra violet (UV) inhibitors
specifically formulated to retard the harmful effects of the sun
and lengthen the life of the slat.
Durability
– Our slats are also resistant to severe weather
conditions, salt water, sand, road dirt, most acids, alcohol,
alkaline, ammonia, petroleum distillates, and common
environmental pollutants.
Maintenance – Our slats are nearly maintenance free. They
may be pressure cleaned of surface contaminants with plain
water.
Wind Load Disclaimer – We will not be held responsible
for fence damage resulting from wind load conditions due to
insufficient structural support.
Designations – Meets ASTM Designation: F3000/F3000M
(except HedgeLink and Aluminum Slat)
Exact representation of colors in printing is difficult. Please
refer to actual color samples for accurate matching. Samples
available upon request.
Available Colors
(colors are approximations)
Beige Redwood Black White
Royal Blue Forest Green
Gray
Dark Brown
Sky Blue
HDPE Technical Properties
Property Values
Melt Index (.6) A low melt index indicates improved stress and crack resistance.
Density (.957) Polyethylene ranges anywhere from .914 to .960 in density.
A higher density yields maximum stiffness without becoming overly brittle.
Minimum Temp. (-76º F) Polyethylene stays flexible even at this temperature extreme.
Maximum Temp. (250º F) Polyethylene does not distort until reaching this temperature.
Tensile Strength (3,700 psi) Material will not suffer distortion at lesser loads or impacts.
Design – The unique shape of this compact and lightweight slat
enables it to be self stacked. A package the size of a 2 x 4 contains
enough material to cover approximately 10 linear feet, making
this product easy to ship and efficient to store.
Fast and Installation – Slide the slats into the wire vertically and
snap them in the bottom-locking channel for security.
Standard Heights – 4 ft., 5 ft., 6 ft., 7 ft., & 8 ft.
Slat Length – 3 1/2” shorter than the overall height of the fence
Wind Load and Privacy Factor – Approximately 75% (Based on
wire/mesh used-stretch tension)
Colors – Beige, Redwood, Black, White, Royal Blue, Forest Green,
Gray, Dark Brown, Sky Blue
EZ Slat
1 1/4”
2” & 9, 11 or 10 Linear
2 1/4” 11 1/2 feet
Slat Name
Slat Mesh Wire Coverage
Width Size Gauge Area
Commercial, Industrial & Residential Fence
Products and Accessories!