User's Manual

Privaris plusID Manager Operators Manual V1.1
Continuous
Solid Green
A successful enrollment
Brief Solid
Red, then
Blinking Green
The sensor did not get sufficient information from
the fingerprint to process the swipe. This often
happens if the sensor is touched before a swipe is
begun, as opposed to placing the finger and
swiping in one continuous motion.
Continuous
Solid Red
Enrollment failed. See “Troubleshooting”
(Appendix A, or under “Help” in the menu tree).
Modify the user's swiping technique accordingly,
erase and re-enroll the finger.
5. Upon a successful enrollment the on-screen prompt, will read “Enrollment
Success,” and a rectangular fingerprint image will appear atop the enrolled
finger on the hand diagram.
! If enrollment fails, see Section 5.h.
e. Enroll the Second Thumb
Repeat the instructions from 5.c. and 5.d., with the user's secondary thumb.
f. Completing Device Issuance
With two thumbs enrolled, enrollment is complete.
To complete the plusID device issuance process, the necessary access credential(s) need
to be assigned to the device to ready it for physical and/or logical (IT) access. See
Section 7 (“Credentials: Using the plusID for Physical Access”) to assign physical access
credentials for door entry, and Section 8. (“Credentials: Using the plusID for Windows
Logon”) to assign logical access credentials for computer logon.
32 11.08.07