User's Manual

Privaris plusID Manager Operators Manual V1.1
b. Loading Door Access Credentials onto a plusID
! Loading credentials for door access requires an additional USB port, a smart
card reader, and an idBank™ available from HID® or Privaris®.
The access credential required for door access is a card format. Card formats
are downloaded onto plusID devices via an idBank™. idBank is a smart card
containing HID Proximity, HID Indala Proximity, CASI Proximity or iCLASS
access card formats that are securely transferred to plusID devices via the plusID
Manager. idBanks are available in quantities of 25, 50, 100, 200 or 300.
!
Once a card format has been loaded on to a plusID device, it cannot be moved
back onto an idBank.
! A card format that has been loaded on to a plusID device is permanently
associated with that device and can never be assigned to another device. It can
however be reloaded onto the initial device if need be (either from the Database
tab, or by reissuing from the original idBANK card).
With the device connected via USB to the Enrollment Administrator’s
computer:
1. Connect a plusID device to the plusID Manager via USB
2. Register the device if it is not already
3. Connect a smart card reader to computer via USB (if not built into
computer).
4. Insert idBank in smart card reader
5. Select “Credentials” from the menu tree. The Credential Management
screen is displayed (Figure 8)
6. Select the “Card” tab under “Credentials Source.”
38 11.08.07