User's Manual

Privaris plusID Manager Operators Manual V1.1
Figure 9
Loadin
g
Lon
g
Ran
g
e Credentials
To load long range credentials:
1. Connect a plusID device to the plusID Manager via USB.
2. Select the Long Range tab under Credentials Source. (Figure 9)
3. The list of available long range transceiver credentials will be
displayed, with their type indicated: Wiegand or Managed. Each
credential is linked to a long range transceiver by the key it contains.
(Transceivers and keys are created using the Long Range Settings
screen. See Section II.3).
4. Select the transceiver with which the plusID 90 will need to
communicate. Each transceiver corresponds to an access point.
5. “Drag” the appropriate transceiver from the list and “drop” it in one of
the four white squares above (each square corresponds to one of the
device’s four function buttons). Doing so loads the transceiver’s
corresponding credential onto the plusID 90 device.
40 11.08.07