User's Manual

Privaris BPID™ LFBT Security Device, V1.4
2. USAGE INSTRUCTIONS
Step 1: Activation
In order to activate a BPID™ Security Device you must be enrolled in the
device. Enrollment is the device issuance process and is typically
managed by an organization’s issuing authority, such as the Information
Technology Department, Security Office, or Human Resources
Department. Enrollment initializes the device and “marries” it to its
owner. During enrollment, users are asked to place their finger on the
device several times in order for the fingerprint sensor to scan and
securely store their print’s features.
Once enrolled in a device, it is activated and ready for use.
Step 2: Using Your Device
FACILITY ACCESS (secured doorways or gated entrances):
1. Open the device’s clear plastic flip-cover.
2. Click the round gray Power Button once.
-A blinking yellow light will indicate that the device is on and is
awaiting a finger.
3. With the yellow light blinking, place an enrolled finger on the
device’s fingerprint sensor in a position used during enrollment.
-A solid yellow light will indicate that the device is scanning your
finger.
4. A solid green light indicates that your fingerprint and your identity
have been successfully verified.
5. With the green light still on, touch the tip of your device to the
device reader located at the doorway or access point.
6. Your device will wirelessly transmit your programmed credentials
to the access point.
7. Access to the facility is permitted.
8. Press the power button to turn off the device. If you forget, it will
power off automatically after approximately 10 seconds.
5