User's Manual
Table Of Contents
- USER MANUAL
- 1. WHAT IS A BPID™ SECURITY DEVICE?
- Overview
- Device Diagram
- Applications
- 2. USAGE INSTRUCTIONS
- 3. BATTERY REPLACEMENT
- 4. SECURITY & PERSONAL PRIVACY
- 5. HOW IT WORKS
- 6. GENERAL TROUBLESHOOTING
- 7. FACILITY ACCESS TROUBLESHOOTING
- 8. COMPUTER/NETWORK LOGON TROUBLESHOOTING
- 9. FREQUENTLY ASKED QUESTIONS
- 10. CUSTOMER SERVICE
- 11. WARRANTY
- 12. LICENSING AGREEMENT
- 13. PERMISSIONS
Privaris BPID™ LFBT Security Device, V1.4
COMPUTER OR NETWORK LOGON:
1. Ensure that the computer or network is powered on.
2. Ensure that the computer has a Bluetooth™ adaptor.
3. Open the device’s clear plastic flip-cover.
4. Double-click the round gray Power Button.
-The green light will continually blink.
5. The device will be detected by a properly configured computer or
network and will request verification.
-A blinking yellow light will indicate that the device is awaiting
verification.
6. With the yellow light blinking, place an enrolled finger on the
device’s fingerprint sensor in a position used during enrollment.
-A solid yellow light will indicate that the device is scanning your
finger.
7. A solid green light indicates that your fingerprint and your identity
have been successfully verified.
8. Upon successful verification, the device will securely transmit
your password to the computer or network.
9. Access is granted.
10. Press the power button to turn off the device. If you forget, it will
power off automatically after a period of time determined by the
application.
6