User's Manual
Table Of Contents
- USER MANUAL
- 1. WHAT IS A BPID™ SECURITY DEVICE?
- Overview
- Device Diagram
- Applications
- 2. USAGE INSTRUCTIONS
- 3. BATTERY REPLACEMENT
- 4. SECURITY & PERSONAL PRIVACY
- 5. HOW IT WORKS
- 6. GENERAL TROUBLESHOOTING
- 7. FACILITY ACCESS TROUBLESHOOTING
- 8. COMPUTER/NETWORK LOGON TROUBLESHOOTING
- 9. FREQUENTLY ASKED QUESTIONS
- 10. CUSTOMER SERVICE
- 11. WARRANTY
- 12. LICENSING AGREEMENT
- 13. PERMISSIONS
Privaris BPID™ LFBT Security Device, V1.4
3. BATTERY REPLACEMENT
The BPID™ Security Device is powered by a CR2 lithium battery, the
same type of battery used in many cameras. A replacement battery can
be purchased at most camera stores, drug stores, or supermarkets.
Battery Level Indicators
Low Battery Indicator:
A quick flashing red light upon start-up at the same time the yellow light
comes on.
Very Low Battery Indicator:
A quick flashing red light upon start-up and then a flashing red light
periodically throughout normal device usage.
Critically Low Battery Indicator:
A quick flashing red light upon start-up and then the device turns itself off
automatically.
Changing the Battery
1. Open the battery compartment on the back of the device by inserting
the tip of a pen into the battery release (the small square at the
bottom of the battery compartment) to pop the release and then slide
the cover open (see Figure 2).
2. Remove the old battery.
3. Insert the new battery with the positive (+) end pointing toward the
top of the device and ensure that it is secured tightly in the
compartment. It should be touching the battery contacts at the top
and bottom of the compartment.
4. Replace the battery cover by aligning it with the ridges of the battery
compartment and sliding it back into position. Make sure that it is
latched securely in place. A loud click is heard when properly
closed.
Replacing the battery does not require the user to be re-enrolled.
7