DISHWASHER DW 24 152989 17/0 INSTRUCTION BOOKLET GB
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety.
Contents For the user For the installer Important safety information 2 Guide to use the instruction book 3 Description of the appliance 4 The control panel 5 Before use Setting the water softener Rinse aid Use of detergent 6 6 8 9 Using your appliance Loading your appliance Adjusting the height of the upper basket 10 10 11 Hints and tips 12 Washing programmes 13 Operating sequence 14 Maintenance and cleaning Internal cleaning Cleaning the central filters Cleaning the large filter Externa
Description of the appliance 15 1 14 2 13 3 4 12 11 5 6 10 9 7 8 IN60 1. Water hardness adjustment 10. Heating element 2. Levelling spacers 11. Lower spray arm 3. Upper basket stop 12. Upper spray arm 4. Large filter 13. Water inlet funnel 5. Salt container 14. Upper basket 6. Rinse aid dispenser 15. Worktop 7. Detergent dispenser 8. Control panel 9.
The control panel A D B 1 2 3 4 5 6 8 7 5. Programme selector dial 1. On/Off indicator light To select a programme, turn the programme selector dial clockwise, making sure that the programme letter you wish to select corresponds with the programme marker on the control panel. At the end of the programme the machine will stop automatically and the On/Off indicator light remains on until the On/Off pushbutton is depressed. 2.
Before use Before using your dishwasher for the first time: ☞ ensure that the electrical and water connections comply with the installation instructions ☞ remove all packaging from inside the appliance ☞ set the water softener ☞ fill the salt container ☞ fill the rinse aid dispenser. Setting the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
Filling with salt Salt must be used from level 2 upward. Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with Rinse Aid: 1. Open the container by turning the lid (A) anticlockwise. A 2. Add the rinse aid until the container is completely full (approx. 110 ml). The indicator (B) will be completely dark.
Use of detergent Only use detergents specifically designed for use in dishwashers. D We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser. Finish Powder recommended for every day use. Finish Liquid Gel ideal for every day use. As the gel is extra gentle is it recommended for fine bone china.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates (up to 27 cm in diameter), salad bowls, cutlery etc.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; Glasses with long stems can be placed upside down in the raised cup racks. Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
Hints and tips To save energy Items not suitable for dishwashers: Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. The following items should not be washed in the dishwasher (unless they are sold as dishwasher proof): If necessary run the Rinse and Hold programme (see "Washing Programmes" chart on the following page), so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
Washing programmes Type of load * Crockery, cutlery, pots and pans Degree of soil Heavy soil Crockery, cutlery, pots and pans Light soil ** Crockery Light soil Quickwash and cutlery Starting position of the programmer Required pushbuttons in the dispenser * Rinse and Hold Cycle description on the dispenser lid Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse up to 65°C Thermal dry A On Off 20 g 5g B On Off 20 g / C On Off 20 g / Main wash up to 65°C 2 cold rinses D O
Operating sequence 1. Check the filters 8. Start the programme Ensure they are clean and properly positioned (see cleaning instructions). Depress the On/Off pushbutton. The On/Off indicator light comes on and the machine will start. 2. Check that there is rinse aid and salt 9. At the end of the washing programme At the end of the washing programme the dishwasher stops automatically. The On/Off indicator light remains on until the On/Off pushbutton is depressed. 3.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of nonoperation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water; 2. Fill the rinse aid dispenser; 3. Leave the door ajar to prevent the formation of any unpleasant smells; 4.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Service and spare parts Prod.No. ........ Ser. No. ......... Mod. ........
Guarantee Conditions Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Ensure the machine is easily accessible for servicing when installed.
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the technical specifications. Your local Water Authority will advise you on the average mains pressure in your area. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.
Water outlet hose connection 1 2 3 Ø 18 Ø 21 1- To the sink outlet siphon, securing it if necessary with a clip. min 4 cm The end of the drain hose can be connected in the following ways: 3- To a wall outlet provided with a vent-hole, minimum internal diameter 4 cm. min 30 cm max 100 cm max 100 cm 2- Hooked over the edge of the sink using the special curved plastic guide provided. CS09 The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the floor.
Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measures not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Adjusting the Worktop You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units. Simply unscrew the two front retaining screws, move the top to the required position and then retighten the screws.
0 04/98