978540de 5-12-2000 14:24 Pagina 1 Geschirrspüler 4100 Standmodell B Gebrauchsanweisung
978540de 5-12-2000 14:24 Pagina 2 Inhaltsverzeichnis Seite Wirtschaftlich und umweltbewusst spülen . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Gerätebeschreibung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Aufstellung / Anschluss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wasserzulauf . . . .
978540de 5-12-2000 14:24 Pagina 3 Sehr geehrte Kundin, sehr geehrter Kunde, Wichtige Informationen und Hinweise Damit Ihnen die Bedienung leicht fällt, haben wir eine ausführ liche Gebrauchsanweisung beigelegt. Bitte lesen Sie auch vor Inbetriebnahme die im separaten Heft vorhandenen Informationen und Hinweise. Sie soll Ihnen helfen, schnell mit Ihrem neuen Gerät vertraut zu werden. Wir wünschen Ihnen viel Freude mit Ihrem neuen Geschirrspüler.
978540de 5-12-2000 14:24 Pagina 4 Gerätebeschreibung Wasserablaufschlauch Drucktasten Türgriff Programmwähler Stromanschlusskabel Arbeitsplatte Wasserzulaufschlauch B Höhenverstellbare Füße LSPRIV90/1 Arbeitsplatte HärtebereichEinstellung Geschirrkorbarretierung oberer Geschirrkorb oberer Sprüharm unterer Sprüharm Salzbehälter Grobsieb Feinsieb Behälter für Reiniger Behälter für Klarspüler Typenschild Bedienblende priv27 4
978540de 5-12-2000 14:24 Pagina 5 Installation Aufstellung/Anschluss Verpackungsteile entfernen Dieser Geschirrspülautomat wird anschlussfertig, also mit Kabel und Stekker, Wasserzulaufschlauch und Wasserablaufschlauch, geliefert. Er kann ohne Sonderinstallation in Betrieb genommen werden, wenn am Aufstellungsort eine vorschriftsmäßig installierte Schutzkontakt-Steckdose, ein Wasserzulauf und ein Wasserablauf vorhanden sind.
978540de 5-12-2000 14:24 Pagina 6 Bitte wenden Sie sich an den Kundendienst, wenn der Wasserdruck höher als 10 bar = 10 atü ist (dann ist der Einbau eines Dr uckminder ventils nötig) oder niedriger als 1 bar = 1 atü. Nach jedem Spülprogramm ist der Wasserhahn zu schließen! Schlauchlänge Der Ablaufschlauch wird zweckmäßigerweise fest installiert. Die Abflußhöhe muss zwischen 30 und 100 cm liegen. Genügender Abflussquerschnitt muss gewährleistet sein.
978540de 5-12-2000 14:24 Pagina 7 Verlegen der Schläuche Tür öffnen und schließen Wasserzu- und -ablaufschlauch sind weitgehend knickfrei. Überzeugen Sie sich davon, dass auch beim Einschieben des Spülers an seinen endgültigen Platz, die Schläuche nicht geknickt oder gequetscht werden und nach den Seiten im Sockelrücksprung verlegt sind. Besondere Vorschriften des örtlichen Wasserwerkes sind genauestens zu beachten.
978540de 5-12-2000 14:24 Pagina 8 Beschreibung der Bedienungsblende B 123 4 1 Betriebskontrolllampe Die Betriebskontrolllampe leuchtet, wenn das Gerät eingeschaltet ist. 2 Ein/Aus-Taste Nachdem Sie das Spülprogramm eingestellt haben, dr ücken Sie die Ein/Aus-Taste. Die Betriebskontrolllampe leuchtet, und das von Ihnen gewählte Programm läuft automatisch ab. 3 Bio- Taste Bei gedrückter Taste wird das Wasser bis 50°C erwärmt. Wird die Taste nicht gedrückt, erfolgt das Aufheizen des Wasser bis 65°C.
78540de 5-12-2000 14:24 Pagina 9 Spülprogramm wählen Programmunterbrechung Stellen Sie am Programmwahlknopf das gewünschte Spülprogramm durch Rechtsdrehung ein (siehe Richtungspfeil). Der Buchstabe am Knopfumfang, der dem jeweiligen Spülprogramm zugeordnet ist, muss mit der Markierung «START» auf der Blende übereinstimmen. Drücken Sie die zum gewünschten Programm gehörende Temperaturtaste.
978540de 5-12-2000 14:24 Pagina 10 Bedienung / Handhabung Wasserenthärtung Regenerierdosierung Hat Ihr Leitungswasser eine Härte von 5° dH und mehr, muss das Wasser unbedingt enthärtet werden, um Kalkablagerungen am Geschirr und in der Maschine zu vermeiden. Über Wasserhärte und Härtebereich in Ihrem Wohngebiet informiert Sie das zuständige Wasserwerk. Zur Wasserenthärtung muss der Salzbehälter der serienmäßig eingebauten Enthärtungsanlage immer mit Regeneriersalz gefüllt sein.
978540de 5-12-2000 14:24 Pagina 11 Einstellung der Regenerierdosierung Tür öffnen! Den Wähler an der Frontseite des Gerätes oben links drehen, bis die gewünschte Regenerierstufe mit der Referenzmarkierung übereinstimmt. 5 2 2 Gewinde und Verschlussdichtung von Salzrückständen säubern. Verschluss fest zuschrauben. Unmittelbar danach ein Spülprogramm ablaufen lassen. Dabei wird auch das übergelaufene Wasser abgepumpt. Die Salzmenge reicht für 20-30 Spülprogramme.
978540de 5-12-2000 14:24 Pagina 12 Klarspüler Klarspüler nachfüllen Es dürfen nur Klarspüler verwendet werden, die speziell für Haushaltsgeschirrspülautomaten geeignet sind. Der Klarspüler sorgt dafür, dass das Geschirr einwandfrei und fleckenlos trocknet. Er wird aus dem Vorratsbehälter automatisch dosiert. Der im Inneren der Tür eingebaute Behälter hat ein Fassungsvermögen von ca. 110 ml, das je nach eingestellter Dosierung für 16-40 Spülgänge ausreicht.
978540de 5-12-2000 14:24 Pagina 13 Reiniger Es dürfen nur Reiniger verwendet werden, die speziell für Haushaltsgeschirrspülautomaten geeignet sind. Es spielt dabei keine Rolle, ob die Reiniger flüssig, pulver- oder tablettenförmig sind. Die Wirkungsweise der verschiedenen Reiniger ist unterschiedlich. Beachten Sie deshalb bitte grundsätzlich die Dosierempfehlungen des Reinigerherstellers.
978540de 5-12-2000 14:24 Pagina 14 Geschirr vorbereiten Einordnen im unteren Korb Alle harten Speisereste entfernen, z.B. Knochen, Gräten, Obstkerne - auch grobe Reste wie z.B. Kartoffelrückstände, Breireste, Spinat, Kaffee- und Teesatz, Salatblätter, Obstschalen, Kaugummi. Angesetzte Speisereste mit Wasser anweichen, evtl. etwas Reiniger zugeben. Es ist wirtschaftlich, erst dann mit einem vollen Programm zu spülen, wenn der Spüler ganz gefüllt ist.
978540de 5-12-2000 14:24 Pagina 15 Besteckkorb: Messer, Gabeln und Löffel mit dem Griff nach unten stellen. Gebrauchsflächen der Löffel nicht ineinander legen. Sehr lange Löffel und langstielige Teile besser in den Obekorb legen. In das entsprechende Fach beiderseits des Korbes werden Löffel, Dessertlöffel, Messer und Kleinbesteck eingeordnet.
978540de 5-12-2000 14:24 Pagina 16 Vor dem Spülen überprüfen ● Sind alle Geschirrteile richtig eingeordnet? Das ist besonders bei leichten Teilen wichtig, damit sie bei der intensiven Wasserumwälzung ihren Stand sicher behalten. ● Stehen die einzelnen Teile frei? Berührungsstellen können das einwandfreie Spülen beeinträchtigen. Können sich die Sprüharme frei drehen? Bitte achten Sie darauf, dass einzelne Teile nicht zu hoch nach oben ragen oder durch die Korbböden nach unten durchhängen.
978540de 5-12-2000 14:24 Pagina 17 Wartung und Pflege Siebeinsätze reinigen Feinsieb Grobsieb Das großflächige Feinsieb (B), muss bei sichtbaren Ablagerungen gereinigt werden. Da das Grobsieb weitgehend selbstreinigend ist, prüfen Sie bitte einmal pro Woche ob sich dort evtl. Speisereste abgelagert haben. 90° B C A MA05 MA04 ● Fassen Sie das Sieb (A) am Griff an und ziehen es nach oben heraus. ● Reinigen Sie das Sieb unter fließendem Wasser.
978540de 5-12-2000 14:24 Pagina 18 Oberer Sprüharm: Zu seiner Reinigung ist der obere Sprüharm vom Wassersammelrohr abzunehmen. Dazu wie folgt vorgehen: - den oberen Geschirrkorb herausziehen; - den Sprüharm nach oben drücken und gleichzeitig durch Drehen im Uhrzeigersinn abschrauben. Den Sprüharm wieder montieren, indem er nach oben gedrückt und gleichzeitig bis zu seiner Blockierung gegen den Uhrzeigersinn eingeschraubt wird. Den Sprüharm loslassen und prüfen, ob er sich ungehindert drehen kann.
978540de 5-12-2000 14:24 Pagina 19 Technische Daten / Abmessungen Technische Daten: Abmessungen: Fassungsvermögen Heizung Ablaufpumpe Umwälzpumpe Spannung Gesamthöhe Höhe ohne Arbeitsplatte Gesamtbreite Gesamttiefe Tiefe ohne Arbeitsplatte Gewicht 12 Maßgedecke 2100 Watt 200 Watt 200 Watt 230 Volt 50 Hz Absicherung 10 Ampere Gesamtanschluss 2300 Watt Wasserdruck mindestens 1 bar Wasserdruck maximal 10 bar Energieeffizienz C Reinigungswirkung B Trockenwirkung C 850 mm 820 mm 600 mm 610 mm 585 mm
978540de 5-12-2000 14:24 Pagina 20 Unterbau des Gerätes Arbeitsplatte entfernen Der Geschirrspülautomat lässt sich auch unter eine vorhandene Tischplatte oder unter eine Spülenabdeckung einbauen; hierzu brauchen Sie nur die beiden hinteren Befestigungsschrauben der Arbeitsplatte zu lösen. Arbeitsplatte von hinten nach vorn herausziehen und abheben. Die Höhe und die Nivellierung durch die Schraubfüße einstellen und das Gerät einbauen.
978540de 5-12-2000 14:24 Pagina 21 Maßgedecke Fassungsvermögen Oberkorb Das Gerät fasst 12 internationale Maßgedecke plus Serviergeschirr nach EN 50242. 12 Suppenteller 12 flache Teller 12 Dessertteller 12 Teetassen 12 Untertassen 12 Trinkgläser 12 Messer 12 Gabeln 12 Löffel 12 Teelöffel 12 Dessertlöffel 1 runde Schüssel 1 runde Schüssel 1 ovale Platte 1 Schale 1 Vorlegegabel 2 Vorlegelöffel 1 Soßenlöffel ca. 23 cm Ø ca. 26 cm Ø ca. 19 cm Ø ca. 9 cm Ø, ca. 0,2 l ca. 14 cm Ø ca. 7 cm Ø, ca.
978540de 5-12-2000 14:24 Pagina 22 Programmübersicht Nr. Programmwähler 1 EnergieSpartaste BIO A 2 A* Taste BIO drücken 3 B** Taste BIO drücken 1) 4 C Spülprogramme Geeignet für: Normal mit Vorreinigen 65°C Normal verschmutztes Geschirr und Töpfe mit angetrockneten Speiseresten. BIO mit Vorreinigen 50°C Normal bis leicht verschmutztes Geschirr und leicht verschmutzte Töpfe. Rapid 50°C Kurzprogramm für leicht verschmutzte Geschirrteile, die sofort wieder benötigt werden.
978540de 5-12-2000 14:24 Pagina 23 Programmablauf und Verbrauchswerte Spülmittelmenge im auf dem Behälter Behälterdeckel Vor- Haupt- Zwischen- Klar- Trocknen spülen spülen spülen spülen mit Heizung Verbrauchswerte *** Strom kWh Wasser Zeit Liter Minuten 25g 5g KALT 65°C 1 x KALT 65°C X 1,4 19 96 25g 5g KALT 50°C 1 x KALT 65°C X 1,3 19 96 25g — — 50°C 1 x KALT 50°C — 1,1 16 40 — — KALT — — — — 0,1 10 6 *** Die Verbrauchswerte differieren je nach Beladung, Netzsp
5-12-2000 14:24 Pagina 24 Geschirrspüler 4100 Standmodell Produkt-Nr. 197.