Geschirrspüler 6500 i Integrierbares Modell Gebrauchsanweisung
Informationen Sehr geehrte Kundin, sehr geehrter Kunde, vielen Dank für Ihren Einkauf bei Quelle. Überzeugen Sie sich selbst: auf unsere Produkte ist Verlass. Damit Ihnen die Bedienung leicht fällt, haben wir eine ausführliche Anweisung beigelegt. Sie soll Ihnen helfen, schnell mit Ihrem neuen Geschirrspülautomat vertraut zu werden. Bitte lesen Sie diese Anweisung vor der Inbetriebnahme aufmerksam durch und beachten Sie auch die aufgeführten Sicherheitshinweise.
Inhaltsverzeichnis Sicherheitshinweise und Warnungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/5 Hinweise zum Umweltschutz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wirtschaftlich und umweltbewusst spülen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wasserschutzsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Geräteansicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sicherheitshinweise und Warnungen Bewahren Sie die Gebrauchsanweisung sorgfältig auf, damit Sie sie auch in Zukunft zu Rate ziehen können. Sollten Sie das Gerät verkaufen oder Dritten überlassen, so sorgen Sie dafür, dass das Gerät komplett mit der Gebrauchsanweisung übergeben wird, damit der neue Besitzer sich über die Arbeitsweise des Gerätes und die diesbezüglichen Hinweise informieren kann.
forderlich, so muss die Geschirrspülmaschine vorher ausgeschaltet werden. Achtung! Es kann je nach Programmphase heißer Dampf austreten. • Gegenstände, die mit Benzin, Lack, Eisen- oder Stahlspänen, korrosiven Chemikalien (Säuren oder Basen) in Kontakt gekommen sind, dürfen nicht in der Geschirrspülmaschine gespült werden. • Spitze Messer und scharfkantige Besteckteile müssen in den Oberkorb gelegt oder mit der Spitze nach unten in den Besteckkorb gestellt werden.
Hinweise zum Umweltschutz Entsorgung der Verpackung Verpackungen und Packhilfsmittel unserer Elektro-Großgeräte sind mit Ausnahme von Holzwerkstoffen recyclingfähig und sollen grundsätzlich der Wiederverwertung zugeführt werden. – Verpackungen von Großgeräten können Sie bei der Anlieferung der Geräte unseren Vertragsspediteuren zurückgeben. Diese veranlassen dann die Weitergabe zur Verwertung bzw. Entsorgung.
Wirtschaftlich und umweltbewusst spülen • Schließen Sie den Geschirrspüler nur dann an Warmwasser an, wenn Sie eine Warmwasseranlage haben, die nicht elektrisch beheizt wird. • Stellen Sie die Wasserenthärtungsanlage korrekt ein. • Spülen Sie das Geschirr nicht unter fließendem Wasser vor. • Wählen Sie die Spülprogramme nach Art und Verschmutzungsgrad des Geschirrs. • Wählen Sie das BLITZ-Programm, wenn die Speisereste nicht angetrocknet sind und eine geringe Trocknung ausreicht.
Geräteansicht Deckendusche Gummidichtung für Ankopplung des Wasserzulaufs zum oberen Sprüharm Sprüharme Härtebereichsschalter Vorratsbehälter für Spezialsalz Behälter für Reinigungsmittel Vorratsbehälter für Klarspüler Typschild Siebe Achtung! Die integrierbaren Modelle werden ohne Arbeitsplatte geliefert 8
Installation Aufstellen des Geschirrspülers • Geschirrspüler muss standsicher und waagrecht ausgerichtet auf festem Boden aufgestellt werden. • Die beiden vorderen Schraubfüße mit Schraubendreher herausschrauben, um Bodenunebenheiten auszugleichen und Gerätehöhe an andere Möbel anzugleichen.
Anschließen des Geschirrspülers Wasserzulauf Der Geschirrspüler hat Sicherheitseinrichtungen, die den Rückfluss von Spülwasser in das Trinkwasser-Leitungsnetz verhindern und den geltenden wassertechnischen Sicherheitsvorschriften entsprechen. • Der Geschirrspüler kann an Kaltwasser und an Warmwasser bis max. 60 °C angeschlossen werden. • Der Geschirrspüler darf nicht an offene Warmwassergeräte und Durchlauferhitzer angeschlossen werden.
Wasserablauf Ablaufschlauch Der Ablaufschlauch wird zweckmäßigerweise fest installiert. Die Abflusshöhe muss zwischen 40 und 100 cm liegen. Genügender Abflussquerschnitt muss gewährleistet sein. Für den Siphonanschluss besitzt der Ablaufschlauch ein Gummiformteil. Wird der Ablaufschlauch am Siphon angeschlossen, so muss die Verbindung mit einer Schlauchschelle gesichert werden. Achtung: Der Ablaufschlauch darf nicht geknickt, gequetscht oder in sich verschlungen sein. Achten Sie auf sorgfältige Verlegung.
Elektrischer Anschluss • Gemäß den technischen Anschlussbedingungen der Elektrizitätsunternehmen darf ein Festanschluss an das elektrische Netz nur von einem zugelassenen Elektroinstallateur durchgeführt werden. • Achten Sie beim Anschluss auf die VDE-Bestimmungen und auf Zusatzbestimmungen der örtlichen Elektrizitätswerke. • Nach dem Einbau dürfen spannungsführende Teile und betriebsisolierte Leitungen mit dem Prüffinger nach EN 60335/DIN VDE 0700 nicht berührbar sein.
Aufstellen und Anschließen des Geschirrspülers Anschlusstechnik Die Einplanung der Anschlüsse für Wasserzu- und -ablauf, sowie Strom, muss immer seitlich vom Geschirrspüler erfolgen. Hinter dem Gerät ist kein Platz dafür vorhanden. Die nachfolgende Abbildung zeigt unter Berücksichtigung verschiedener Gegebenheiten beispielhaft, wie die Sanitärund Elektroinstallation durchgeführt werden kann.
Beschreibung der Bedienblende 1 Programm-Tasten 2 4in1 / 3in1-Taste 3 Kontroll-Anzeigen 4 Türgriff 5 Ein / Aus-Taste 6 Funktions-Tasten 7 Programm-Ablaufanzeige Hinweis: Das Spülprogramm und die Temperatur sind richtig eingestellt, wenn die entsprechende Programm-Taste gedrückt wurde.
Bedienung / Einstellen der Programme 1 Programm-Tasten 6 Funktions-Tasten Durch Drücken der entsprechenden Taste wählen Sie das gewünschte Spülprogramm. Das gewählte Programm ist eingeschaltet, wenn die darüber liegende Lampe leuchtet. Diese Tasten haben 3 Funktionen. Zusätzlich zu den aufgedruckten Spülprogrammen kann mit diesen Tasten, in Kombination mit dem EIN/AUS-Schalter • der Wasserenthärter des Geschirrspülers eingestellt werden ( Seite 18).
Inbetriebnahme Vor der ersten Inbetriebnahme Entfernen Sie vor Inbetriebnahme alle Klammern, mit denen die Geschirrkörbe für den Transport gesichert werden. Führen Sie dann folgende Schritte durch: • Wasserenthärter einstellen • Spezialsalz für Wasserenthärter einfüllen • Klarspüler einfüllen Wasserenthärter einstellen Um Kalkablagerungen auf Geschirr und im Geschirrspüler zu verhindern, muss das Geschirr mit weichem, d.h. kalkarmen Wasser gespült werden.
Wenn für die Verwendung von Reinigungsmittel inkl. Spezialsalz der Wasserenthärter elektronisch auf „1“ eingestellt wird, dann wird damit die Kontroll-Anzeige für Spezialsalz abgeschaltet. Verwenden Sie nur Spezialsalz für Geschirrspüler. Füllen Sie niemals andere Salzarten (z.B. Speisesalz) oder Geschirrspülreiniger in den Salzvorratsbehälter. Dies würde den Wasserenthärter zerstören.
Der Wasserenthärter wird mechanisch mit dem Härtebereichsschalter und zusätzlich elektronisch mit den Tasten des Bedienfeldes eingestellt. 1. Geschirrspüler muss ausgeschaltet sein. 2. Mechanische Einstellung: Tür des Geschirrspülers öffnen. 3. Unteren Geschirrkorb aus dem Geschirrspüler herausnehmen. 4. Härtebereichsschalter auf O oder 1 drehen. 5. Unteren Geschirrkorb wieder einsetzen. 6. Elektronische Einstellung: EIN/AUS-Taste drücken. Die LED der EIN/AUS-Taste leuchtet.
Spezialsalz einfüllen Wenn Sie Reinigungsmittel und Spezialsalz getrennt verwenden, füllen Sie Spezialsalz ein: – Vor der ersten Inbetriebnahme des Geschirrspülers. – Wenn auf der Bedienblende die Kontrollanzeige für Spezialsalz SALZ leuchtet. 1. Tür öffnen, Unterkorb herausnehmen. 2. Verschlusskappe des Salzvorratsbehälters entgegen dem Uhrzeigersinn aufdrehen. 3. Nur bei Erstinbetriebnahme: Salzvorratsbehälter mit Wasser voll füllen. 4. Mitgelieferten Trichter auf die Öffnung des Vorratsbehälters stecken.
Klarspüler Klarspülerzulauf einschalten (nur möglich bei ausgewählter Durch den Klarspüler erhält man fleckenfreies, glänzendes Geschirr und 3in1 Funktion) klare Gläser. Sie haben 2 Möglichkeiten, Klarspüler zuzuführen: • Wenn Sie Reinigungsmittel verwenden, welches den Klarspüler bereits enthält, wird das Reinigungsmittel inkl. Klarspüler in den Behälter für Reinigungsmittel gegeben.
Die Anzeige ENDE zeigt die momentane Einstellung an: Anzeige ENDE leuchtet: Klarspülerzulauf eingeschaltet Anzeige ENDE leuchtet nicht: Klarspülerzulauf ausgeschaltet (Voreinstellung ab Werk) 5. Drücken der Programmtaste „AUTOMATIC“ ändert die Einstellung. 6. Ist der Klarspülerzulauf richtig eingestellt, EIN/AUS-Taste drücken. Die Einstellung für den Klarspülerzulauf ist dann gespeichert. Klarspüler einfüllen Verwenden Sie nur Marken-Klarspüler für Geschirrspüler.
4. Klarspüler genau bis zur gestrichel- ten Markierung „max“ einfüllen; das entspricht einer Füllmenge von ca.140 ml. 5. Deckel zurückklappen und zudrücken, bis dieser einrastet. 6. Wenn Klarspüler danebengelaufen ist, mit einem Lappen wegwischen. Sonst bildet sich beim Spülen zuviel Schaum. Klarspülerdosierung einstellen Beim Geschirrspülen wird aus dem Vorratsfach Klarspüler ins Spülwasser abgegeben. Die Dosierung können Sie von 1-6 einstellen. Vom Werk ist die Dosierung auf „4“ eingestellt.
Bedienung / Handhabung Besteck und Geschirr einordnen Zum Spülen im Geschirrspüler nicht geeignet: • Bestecke mit Holz-, Horn-, Porzellan- oder Perlmuttgriffen • nicht hitzebeständige Kunststoffteile • älteres Besteck, dessen Kitt temperaturempfindlich ist • geklebte Geschirr- oder Besteckteile • Zinn- bzw.
stigste Einordnung ausprobieren, um das Fassungsvermögen voll auszunutzen. Das haben Sie sicher bald im Griff. Besteckgitters weggelassen werden. Besteckkorb Achtung! Lange, spitze Besteckteile stellen im Besteckkorb, besonders für Kinder, eine Gefahrenquelle dar. Sie müssen daher in den Oberkorb gelegt werden. • Besteckkorb Der Besteckkorb befindet sich im Unterkorb.
• Beide Griffteile wieder zusammenklappen. Einordnen im unteren Korb Stark verschmutztes, größeres Geschirr wird im Unterkorb gründlich gereinigt. • Unterkorb ganz herausziehen. • Große und schwere Geschirrteile wie Teller, Schüsseln, Töpfe usw. in den Unterkorb einordnen. • Um größeres Geschirr leichter einzuordnen, können die Stegreihen der hinteren Tellereinsätze umgeklappt werden. 1. Besteckkorb herausnehmen. 2. Stegreihen der Tellereinsätze überkreuz umklappen.
Einordnen im oberen Korb Empfindliche kleinere Geschirrteile werden im Oberkorb schonend gereinigt. • Wein-, Sekt- sowie Cognacgläser in die Ausschnitte der Tassenauflagen lehnen bzw. hängen. • Oberkorb bis zum Anschlag herausziehen. • Kleine, leichte empfindliche Geschirrteile wie Untertassen, Tassen, Gläser, sowie temperaturbeständige Kunststoffteile in den Oberkorb einordnen. • Zum Einstellen hoher Teile lassen sich die Tassenauflagen hochklappen. • Gläser, Becher usw.
Oberkorb in der Höhe verstellen Der Oberkorb ist höhenverstellbar. Im abgesenkten Zustand beträgt die Geschirrhöhe – im Oberkorb max. 24 cm. – im Unterkorb max. 29 cm. Im angehobenen Zustand beträgt die Geschirrhöhe – im Oberkorb max. 22 cm. – im Unterkorb max. 30 cm. Je nach Modell ist das Gerät mit dem Oberkorb „Variante 1“ oder „Variante 2“ ausgestattet: Variante 1 Variante 2 • Anheben/Absenken des Oberkorbs • Anheben/Absenken des Oberkorbs 1. Oberkorb ganz herausziehen. 2.
Vor dem Spülen überprüfen • Sind alle Geschirrteile richtig eingeordnet? Das ist besonders bei leichten Teilen wichtig, damit sie bei der intensiven Wasserumwälzung ihren Stand sicher behalten. • Stehen die einzelnen Teile frei? Berührungsstellen können das einwandfreie Spülen beeinträchtigen. • Können sich die Sprüharme frei drehen? Bitte achten Sie darauf, dass einzelne Teile nicht zu hoch nach oben ragen oder durch die Korbböden nach unten durchhängen.
anzeigen überflüssig. Stellen Sie die niedrigste Wasserhärteneinstellung ein. Wenn Sie keine 3-in-1 Produkte mehr verwenden wollen, gehen Sie bitte wie folgt vor: • Schalten Sie die 3in1 Funktion aus. • Füllen Sie wieder die Behälter für Salz und Klarspüler. • Schalten Sie die Wasserhärte auf die höchstmögliche Einstellung und führen Sie drei Normalzyklen ohne Ladung durch. • Stellen Sie dann die Wasserhärte auf die für Ihre Gegend erforderliche Einstellung.
4in1 / 3in1 -Taste Ihr Gerät ist mit einer speziellen Zusatzfunktion ausgestattet, die die optimale Nutzung von 3-in-1 Reinigungsmitteln ermöglicht und welche die Zugabe von Klarspüler und Spezialsalz überflüssig macht. Diese Zusatzfunktion kann zu allen Spülprogrammen dazugewählt werden. 1. 3-in-1 Reinigungsmittel in den dafür vorgesehenen Behälter geben. 2. Gerät einschalten. 3. Taste 4in1/ 3in1 drücken. Die Anzeige der 4in1 / 3in1 Taste leuchtet.
50°C-Spülprogramme und Kompaktreiniger Reinigungsmittel für Geschirrspüler lassen sich anhand ihrer chemischen Zusammensetzung in zwei Grundtypen einteilen: • herkömmliche, alkalische Reiniger mit ätzenden Bestandteilen • niederalkalische Kompaktreiniger mit natürlichen Enzymen. 50°C-Spülprogramme in Verbindung mit Kompaktreinigern entlasten die Umwelt und schonen Ihr Geschirr, denn 50°C-Spülprogramme sind speziell auf die schmutzlösenden Eigenschaften der Enzyme im Kompaktreiniger abgestimmt.
Spülprogramm Spülprogramm starten 1. Überprüfen Sie, ob Geschirr und Besteck im Geschirrspüler so eingeordnet sind, dass die Sprüharme sich frei drehen können. 2. Wasserhahn ganz aufdrehen. 3. Tür schließen. 4. EIN/AUS-Taste drücken. Anzeige der EIN/AUS-Taste leuchtet. 5. Programmtaste für das gewünschte Programm drücken (siehe „Programmtabelle“). Programmanzeige leuchtet. Ein oder zwei Lampen der Programmablaufanzeige blinken. Das Programm kann während dieser Zeit umgewählt werden.
Geschirrspüler ausschalten Kurzanweisung Geschirrspüler erst ausschalten, wenn in der Programmablaufanzeige ENDE leuchtet. 1. EIN/AUS-Taste drücken. LED-Anzeige erlischt. Achtung: Beim Öffnen der Tür, unmittelbar nach Programmende, kann heißer Dampf austreten. 2. Tür öffnen. Die wichtigsten Handgriffe bei der Inbetriebnahme des Gerätes sind folgende: Geschirr ausräumen • Heißes Geschirr ist stoßempfindlich. Geschirr deshalb vor dem Ausräumen abkühlen lassen.
Pflege und Wartung Auf keinen Fall handelsübliche Möbelpflege- oder aggressive Reinigungsmittel verwenden. • Bedienteile des Geschirrspülers bei Bedarf nur mit einem weichen Lappen und warmem, klarem Wasser reinigen. • Innenbehälter, Türdichtung und Wasserzulauf gelegentlich auf Verschmutzungen kontrollieren und gegebenenfalls reinigen. ziehen. Reinigung der Siebe Die Siebe müssen regelmäßig kontrolliert und gereinigt werden. Verschmutzte Siebe beeinträchtigen das Spülergebnis 1.
Achtung: Ohne Siebe darf auf keinen Fall gespült werden. Niemals versuchen, die Sprüharme zu entfernen, da der Geschirrspüler dadurch Schaden nehmen kann. Eventuell verstopfte Düsen mit einem Zahnstocher reinigen. Edelstahlteile Bottich und Türinnenteil bestehen aus Edelstahl. Ein Rostanflug ist auf eisenhaltiges Wasser zurückzuführen: „Fremdrost“ ist auch bei Edelstahlteilen möglich. Mit feinkörnigem Putzmittel entfernen. Keine chlorhaltigen oder eisenhaltigen Scheuermittel verwenden.
Behebung kleiner Störungen Hinweise zur Behebung kleiner Störungen Wenn Sie unsere Ratschläge beachten, werden Sie immer Freude an Ihrer Geschirrspülmaschine haben. Sollte trotzdem eine Störung auftreten, so prüfen Sie bitte erst die nachfolgend angeführten Punkte, bevor Sie einen Fachmann zu Rate ziehen. Was ist, wenn... ...
• Sind die Düsen der Sprüharme teilweise verstopft? • Ist der Salzbehälterdeckel richtig geschlossen? • Ist der Deckel des Salzvorratsbehälters richtig geschlossen? • Ist die Wasserenthärtungsanlage richtig eingestellt? ... das Geschirr nicht trocken wird und ohne Glanz bleibt? • Befindet sich noch Klarspüler im Vorratsbehälter? • Haben Sie Marken-Klarspüler verwendet? ... beim Spülen Pfeifgeräusche zu hören sind? • Das Pfeifen ist unbedenklich. Evtl. Abhilfe, anderen Markenreiniger verwenden. ...
Kundendienst Wichtig! Tritt eine Störung auf, so prüfen Sie bitte zunächst, ob Sie auch die in dieser Gebrauchsanweisung enthaltenen Hinweise und Ratschläge beachtet haben, bevor Sie den Kundendienst rufen. Störung Wenn Sie für eine Störung keinen Hinweis in der Gebrauchsanweisung finden, so verständigen Sie bitte unseren -- Technischen Kundendienst -„Profectis“. Die Kundendienst-Adressen der nächstgelegenen Servicestelle finden Sie im aktuellen Quelle-Katalog oder im Internet unter: Deutschland www.
Technische Daten / Abmessungen Technische Daten: Fassungsvermögen Durchflusserhitzer Ablaufpumpe Umwälzpumpe Spannung 12 Maßgedecke 2035 Watt 30 Watt 150 Watt 220-230 Volt 50 Hz Sicherung, HLS-Automat 10 Ampere Gesamtanschluss 2100 Watt Wasserdruck mindestens 1 bar Wasserdruck maximal 10 bar Energieeffizienz Reinigungswirkung Trockenwirkung Bei Wasserdruck über 10 bar muss ein Druckminderventil vorgeschaltet werden. Auskunft erteilt der Kundendienst. Gerät nur senkrecht transportieren (z.B.
Hinweise für Prüfinstitute Die Prüfung nach EN 60704 muss bei voller Beladung mit dem Testprogramm (siehe Programmtabelle) durchgeführt werden. Die Prüfungen nach EN 50242 müssen mit vollem Salzbehälter des Wasserenthärters, mit vollem Vorratsbehälter für Klarspüler und mit dem Testprogramm (siehe Programmtabelle) durchgeführt werden. Volle Beladung: 12 Maßgedecke einschl. Servicegeschirr Halbvolle Beladung: 6 Maßgedecke einschl.
Programmwahl Wenn Ihr Geschirr so aussieht, wählen Sie ein Intensiv-Programm ein Normal- oder Bioprogramm ein Blitz- oder Glasprogramm 41
Programmübersicht Programm Intensiv 70° mit Vorspülen Geeignet für Stark verschmutztes Ess- und Kochgeschirr mit angetrockneten Speiseresten, besonders Eiweiß und Stärke. Stark bis leicht verschmutztes Ess- und Kochgeschirr mit angetrockneten Speiseresten. AUTOMATIC Blitz 60° BIO 50° * mit Vorspülen Glas 45° Frisch benutztes Geschirr ohne Töpfe, normal bis leicht verschmutzt.
Verbrauchswerte Programmablauf 1) Vorspülen Reinigen 2x Zwischenspülen Klarspülen Trocknen Vorspülen Reinigen Zwischenspülen Klarspülen Trocknen Reinigen Klarspülen Vorspülen Reinigen Zwischenspülen Klarspülen Trocknen Reinigen 2x Zwischenspülen Klarspülen Trocknen Durchschnittliche Programmdauer in Minuten bei Kaltwasseranschluss 2)3) Durchschnittlicher DurchschnittliEnergieverbrauch cher Wasserverin kWh bei Kaltbrauch in Litern wasseranschluss 2) 2) 110 - 120 1,75 - 1,95 22 - 24 90 - 110 1,00 - 1
Gewährleistung Bei allen technischen Geräten von QUELLE beheben wir eventuelle Mängel im Rahmen der gesetzlichen Gewährleistungspflicht. Im Gewährleistungsfall wenden Sie sich bitte an eine QUELLE-Verkaufsstelle in Ihrer Nähe, an den Technischen Kundendienst PROFECTIS oder rufen Sie bei einer unserer Service-Hotlines an. Die Bedingungen und die Telefonnummern hierzu finden Sie im Service-Teil des QUELLEHauptkataloges. Geschirrspüler Privileg 6500 i Integr. Modell weiss Produkt-Nr. 822.643 3 Integr.