Geschirrspüler Pro Comfort 76680 i Integrierbares Modell Gebrauchsanweisung
Informationen Sehr geehrte Kundin, sehr geehrter Kunde, vielen Dank für Ihren Einkauf bei Quelle. Überzeugen Sie sich selbst: auf unsere Produkte ist Verlass. Damit Ihnen die Bedienung leicht fällt, haben wir eine ausführliche Anweisung beigelegt. Sie soll Ihnen helfen, schnell mit Ihrem neuen Geschirrspülautomat vertraut zu werden. Bitte lesen Sie diese Anweisung vor der Inbetriebnahme aufmerksam durch und beachten Sie auch die aufgeführten Sicherheitshinweise.
Inhaltsverzeichnis Sicherheitshinweise und Warnungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/5 Hinweise zum Umweltschutz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wirtschaftlich und umweltbewusst spülen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wasserschutzsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Geräteansicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sicherheitshinweise und Warnungen Bewahren Sie die Gebrauchsanweisung sorgfältig auf, damit Sie sie auch in Zukunft zu Rate ziehen können. Sollten Sie das Gerät verkaufen oder Dritten überlassen, so sorgen Sie dafür, dass das Gerät komplett mit der Gebrauchsanweisung übergeben wird, damit der neue Besitzer sich über die Arbeitsweise des Gerätes und die diesbezüglichen Hinweise informieren kann.
forderlich, so muss die Geschirrspülmaschine vorher ausgeschaltet werden. Achtung! Es kann je nach Programmphase heißer Dampf austreten. • Gegenstände, die mit Benzin, Lack, Eisen- oder Stahlspänen, korrosiven Chemikalien (Säuren oder Basen) in Kontakt gekommen sind, dürfen nicht in der Geschirrspülmaschine gespült werden. • Spitze Messer und scharfkantige Besteckteile müssen in den Oberkorb gelegt oder mit der Spitze nach unten in den Besteckkorb gestellt werden.
Hinweise zum Umweltschutz Entsorgung der Verpackung Verpackungen und Packhilfsmittel unserer Elektro-Großgeräte sind mit Ausnahme von Holzwerkstoffen recyclingfähig und sollen grundsätzlich der Wiederverwertung zugeführt werden. – Verpackungen von Großgeräten können Sie bei der Anlieferung der Geräte unseren Vertragsspediteuren zurückgeben. Diese veranlassen dann die Weitergabe zur Verwertung bzw. Entsorgung.
Wirtschaftlich und umweltbewusst spülen • Schließen Sie den Geschirrspüler nur dann an Warmwasser an, wenn Sie eine Warmwasseranlage haben, die nicht elektrisch beheizt wird. • Stellen Sie die Wasserenthärtungsanlage korrekt ein. • Spülen Sie das Geschirr nicht unter fließendem Wasser vor. • Wählen Sie die Spülprogramme nach Art und Verschmutzungsgrad des Geschirrs. • Wählen Sie das BLITZ-Programm, wenn die Speisereste nicht angetrocknet sind und eine geringe Trocknung ausreicht.
Geräteansicht Deckendusche Gummidichtung für Ankopplung des Wasserzulaufs zum oberen Sprüharm Sprüharme Härtebereichsschalter Vorratsbehälter für Spezialsalz Behälter für Reinigungsmittel Vorratsbehälter für Klarspüler Typschild Siebe Achtung! Die integrierbaren Modelle werden ohne Arbeitsplatte geliefert 8
Installation Aufstellen des Geschirrspülers • Geschirrspüler muss standsicher und waagrecht ausgerichtet auf festem Boden aufgestellt werden. • Die beiden vorderen Schraubfüße mit Schraubendreher herausschrauben, um Bodenunebenheiten auszugleichen und Gerätehöhe an andere Möbel anzugleichen.
Anschließen des Geschirrspülers Wasserzulauf Der Geschirrspüler hat Sicherheitseinrichtungen, die den Rückfluss von Spülwasser in das Trinkwasser-Leitungsnetz verhindern und den geltenden wassertechnischen Sicherheitsvorschriften entsprechen. • Der Geschirrspüler kann an Kaltwasser und an Warmwasser bis max. 60 °C angeschlossen werden. • Der Geschirrspüler darf nicht an offene Warmwassergeräte und Durchlauferhitzer angeschlossen werden.
Wasserablauf Ablaufschlauch Der Ablaufschlauch wird zweckmäßigerweise fest installiert. Genügender Abflussquerschnitt muss gewährleistet sein. Für den Siphonanschluss besitzt der Ablaufschlauch ein Gummiformteil. Wird der Ablaufschlauch am Siphon angeschlossen, so muss die Verbindung mit einer Schlauchschelle gesichert werden. Achtung: Der Ablaufschlauch darf nicht geknickt, gequetscht oder in sich verschlungen sein. Achten Sie auf sorgfältige Verlegung.
Elektrischer Anschluss • Gemäß den technischen Anschlussbedingungen der Elektrizitätsunternehmen darf ein Festanschluss an das elektrische Netz nur von einem zugelassenen Elektroinstallateur durchgeführt werden. • Achten Sie beim Anschluss auf die VDE-Bestimmungen und auf Zusatzbestimmungen der örtlichen Elektrizitätswerke. • Nach dem Einbau dürfen spannungsführende Teile und betriebsisolierte Leitungen mit dem Prüffinger nach EN 60335/DIN VDE 0700 nicht berührbar sein.
Aufstellen und Anschließen des Geschirrspülers Anschlusstechnik Die Einplanung der Anschlüsse für Wasserzu- und -ablauf, sowie Strom, muss immer seitlich vom Geschirrspüler erfolgen. Hinter dem Gerät ist kein Platz dafür vorhanden. Die nachfolgende Abbildung zeigt unter Berücksichtigung verschiedener Gegebenheiten beispielhaft, wie die Sanitärund Elektroinstallation durchgeführt werden kann.
Beschreibung der Bedienblende 1 Ein / Aus-Taste 2 Programm-Tasten 3 Türgriff 4 Startzeitvorwahl-Taste 5 „3 in 1“- Taste 6 „ANTIBAK“- Taste 7 Funktions-Tasten 8 Multidisplay 9 Kontroll-Anzeigen Hinweis: Das Spülprogramm und die Temperatur sind richtig eingestellt, wenn die entsprechende Programm-Taste gedrückt wurde.
Bedienung / Einstellen der Programme 1 Ein / Aus-Taste 7 Funktions-Tasten Durch Drücken der Ein/Aus-Taste wird das Gerät ein- bzw. ausgeschaltet. Die Betriebskontrolllampe leuchtet oder erlischt. Durch Drücken der entsprechenden Taste wählen Sie das gewünschte Spülprogramm. Das gewählte Programm ist eingeschaltet, wenn die darüber liegende Lampe leuchtet. Diese Tasten haben 3 Funktionen.
Klarspüler Die Kontrolllampe „KLARSPÜLER“ leuchtet: Es muss Klarspüler ein- bzw. nachgefüllt werden. Hinweis: Bei den Programmtasten handelt es sich um Kurzhub-Tasten, die nicht einrasten. Lediglich die EIN/AUS-Taste rastet ein. Inbetriebnahme Vor der ersten Inbetriebnahme Entfernen Sie vor Inbetriebnahme alle Klammern, mit denen die Geschirrkörbe für den Transport gesichert werden.
Wenn für die Verwendung von Reinigungsmittel inkl. Spezialsalz der Wasserenthärter elektronisch auf „1“ eingestellt wird, dann wird damit die Kontroll-Anzeige für Spezialsalz abgeschaltet. Verwenden Sie nur Spezialsalz für Geschirrspüler. Füllen Sie niemals andere Salzarten (z.B. Speisesalz) oder Geschirrspülreiniger in den Salzvorratsbehälter. Dies würde den Wasserenthärter zerstören.
Der Wasserenthärter wird mechanisch mit dem Härtebereichsschalter und zusätzlich elektronisch mit den Tasten des Bedienfeldes eingestellt. 1. Geschirrspüler muss ausgeschaltet sein. 2. Mechanische Einstellung: Tür des Geschirrspülers öffnen. 3. Unteren Geschirrkorb aus dem Geschirrspüler herausnehmen. 4. Härtebereichsschalter auf O oder 1 drehen. 5. Unteren Geschirrkorb wieder einsetzen. 6. Elektronische Einstellung: EIN/AUS-Taste drücken. Die LED der EIN/AUS-Taste leuchtet.
Spezialsalz einfüllen Wenn Sie Reinigungsmittel und Spezialsalz getrennt verwenden, füllen Sie Spezialsalz ein: – Vor der ersten Inbetriebnahme des Geschirrspülers. – Wenn auf der Bedienblende die Kontrollanzeige für Spezialsalz SALZ leuchtet. 1. Tür öffnen, Unterkorb herausnehmen. 2. Verschlusskappe des Salzvorratsbehälters entgegen dem Uhrzeigersinn aufdrehen. 3. Nur bei Erstinbetriebnahme: Salzvorratsbehälter mit Wasser voll füllen. 4. Mitgelieferten Trichter auf die Öffnung des Vorratsbehälters stecken.
Klarspüler Klarspülerzulauf einschalten (nur möglich bei ausgewählter Durch den Klarspüler erhält man fleckenfreies, glänzendes Geschirr und 3in1 Funktion) klare Gläser. Sie haben 2 Möglichkeiten, Klarspüler zuzuführen: • Wenn Sie Reinigungsmittel verwenden, welches den Klarspüler bereits enthält, wird das Reinigungsmittel inkl. Klarspüler in den Behälter für Reinigungsmittel gegeben. – In diesem Fall muss der Klarspülerzulauf aus dem Vorratsbehälter ausgeschaltet sein, um Doppeldosierung zu vermeiden.
Einstellung an: – Klarspülerzulauf bei ausgewählter 3in1Funktion ausgeschaltet (Einstellung ab Werk) – Klarspülerzulauf bei ausgewählter 3in1Funktion eingeschaltet 5. Drücken der Programmtaste „AUTOMATIC“ ändert die Einstellung. 6. Zeigt das Multidisplay die gewünschte Einstellung an, EIN/AUSTaste drücken. Die Einstellung ist dann gespeichert. Klarspüler einfüllen Verwenden Sie nur Marken-Klarspüler für Geschirrspüler.
4. Klarspüler genau bis zur gestrichel- ten Markierung „max“ einfüllen; das entspricht einer Füllmenge von ca.140 ml. 5. Deckel zurückklappen und zudrücken, bis dieser einrastet. 6. Wenn Klarspüler danebengelaufen ist, mit einem Lappen wegwischen. Sonst bildet sich beim Spülen zuviel Schaum. Klarspülerdosierung einstellen Beim Geschirrspülen wird aus dem Vorratsfach Klarspüler ins Spülwasser abgegeben. Die Dosierung können Sie von 1-6 einstellen. Vom Werk ist die Dosierung auf „4“ eingestellt.
Bedienung / Handhabung Besteck und Geschirr einordnen Zum Spülen im Geschirrspüler nicht geeignet: • Bestecke mit Holz-, Horn-, Porzellan- oder Perlmuttgriffen • nicht hitzebeständige Kunststoffteile • älteres Besteck, dessen Kitt temperaturempfindlich ist • geklebte Geschirr- oder Besteckteile • Zinn- bzw.
stigste Einordnung ausprobieren, um das Fassungsvermögen voll auszunutzen. Das haben Sie sicher bald im Griff. Besteckgitters weggelassen werden. Besteckkorb Achtung! Lange, spitze Besteckteile stellen im Besteckkorb, besonders für Kinder, eine Gefahrenquelle dar. Sie müssen daher in den Oberkorb gelegt werden. • Besteckkorb Der Besteckkorb befindet sich im Unterkorb.
• Beide Griffteile wieder zusammenklappen. Einordnen im unteren Korb Stark verschmutztes, größeres Geschirr wird im Unterkorb gründlich gereinigt. • Unterkorb ganz herausziehen. • Große und schwere Geschirrteile wie Teller, Schüsseln, Töpfe usw. in den Unterkorb einordnen. • Um größeres Geschirr leichter einzuordnen, können die Stegreihen der hinteren Tellereinsätze umgeklappt werden. 1. Besteckkorb herausnehmen. 2. Stegreihen der Tellereinsätze überkreuz umklappen.
Bier- und Sektgläser In die Bierglashalter links im Unterkorb können bis zu vier Weizenbiergläser, Pilsflöten etc. eingehängt werden. Bei Bedarf können die Bierglashalter hochgeklappt werden. Achtung: Verletzungsgefahr: Mit der Hand nicht in das Gestänge greifen; Hand zur Unterstützung unterhalb des Gestänges am Besteckkorb platzieren. 2. Gestänge wieder befestigen durch Schieben nach rechts. Das Gestänge zur Befestigung der Bierglashalter bzw. Tassenauflagen lässt sich, falls gewünscht, entfernen. 1.
• Kleine, leichte empfindliche Geschirrteile wie Untertassen, Tassen, Gläser, sowie temperaturbeständige Kunststoffteile in den Oberkorb einordnen. • Zum Einstellen hoher Teile lassen sich die Tassenauflagen hochklappen. • Wein-, Sekt- sowie Cognacgläser in die Ausschnitte der Tassenauflagen lehnen bzw. hängen. auf die Stachelreihen gestellt werden. Bei weggeklappten Stachelreihen entsteht mehr Platz für Teller oder Schüsseln. • Für langstielige Gläser Glasauflage nach rechts umklappen.
Oberkorb in der Höhe verstellen Der Oberkorb ist höhenverstellbar. • Absenken des Oberkorbs 1. Oberkorb ganz herausziehen. 2. Oberkorb am Griff bis zum Anschlag anheben und senkrecht absenken. Der Oberkorb rastet in der unteren Position ein. Im abgesenkten Zustand beträgt die Geschirrhöhe – im Oberkorb max. 24 cm. – im Unterkorb max. 29 cm.
Achtung : Legen Sie Tabletten niemals in den Innenraum des Geschirrspülers oder den Besteckkorb, da dadurch die Geschirrspülleistung verringert wird. Legen Sie Tabletten immer in den Behälter für Reinigungsmittel. Verwendung von 3-in-1 Reinigungsmitteln Allgemeine Hinweise Bei diesen Produkten handelt es sich um Reiniger mit kombinierten Klarspülund Salzfunktionen. 1.
2. Reiniger in den Behälter für Reinigungsmittel füllen. Als Dosierhilfe dienen die Markierungslinien: „20“ entspricht ca. 20 ml Reiniger, „30“ entspricht ca. 30 ml Reiniger. 3. Deckel zurückklappen und zudrücken, bis dieser einrastet. Bei sehr stark verschmutztem Geschirr füllen Sie zusätzlich Reinigungsmittel in die Nebenkammer (2). Dieser Reiniger wird bereits beim Vorspülen wirksam.
50°C-Spülprogramme und Kompaktreiniger Reinigungsmittel für Geschirrspüler lassen sich anhand ihrer chemischen Zusammensetzung in zwei Grundtypen einteilen: • herkömmliche, alkalische Reiniger mit ätzenden Bestandteilen • niederalkalische Kompaktreiniger mit natürlichen Enzymen. 50°C-Spülprogramme in Verbindung mit Kompaktreinigern entlasten die Umwelt und schonen Ihr Geschirr, denn 50°C-Spülprogramme sind speziell auf die schmutzlösenden Eigenschaften der Enzyme im Kompaktreiniger abgestimmt.
Spülprogramm / Startzeitvorwahl Spülprogramm starten 1. Überprüfen Sie, ob Geschirr und Besteck im Geschirrspüler so eingeordnet sind, dass die Sprüharme sich frei drehen können. 2. Wasserhahn ganz aufdrehen. 3. Tür schließen. 4. EIN/AUS-Taste drücken. Die Anzeige der EIN/AUS-Taste leuchtet. 5. Programmtaste für das gewünschte Programm drücken (siehe „Programmtabelle“). Die Programmanzeige leuchtet. Im Multidisplay wird die zu erwartende Restlaufzeit für das Programm angezeigt.
Hinweis: Durch Ausschalten des Geschirrspülers wird ein gewähltes Spülprogramm nur unterbrochen, nicht abgebrochen. Nach erneutem Einschalten wird das Spülprogramm fortgesetzt. Startzeitvorwahl einstellen oder ändern Mit der Startzeitvorwahl können Sie einstellen, wann ein Spülprogramm innerhalb der nächsten 19 Stunden beginnen soll. Startzeitvorwahl einstellen: 1. EIN/AUS-Taste drücken. 2.
schirrmenge an. Dadurch ist es möglich, auch wenig Geschirr schnell und wirtschaftlich zu spülen. Bei halber Beladung (6 Maßgedecke) werden bis zu 2 Liter Wasser und 0,2 kWh Strom eingespart. Zusatzfunktion „ANTIBAK“ Ihr Gerät ist mit einer speziellen Zusatzfunktion ausgestattet, die es ermöglicht, Geschirr, wie z.B. Babyflaschen oder Marmeladengläser weitgehend zu desinfizieren. Diese Zusatzfunktion kann zu allen Spülprogrammen dazugewählt werden (Ausnahme: Glasprogramm und Vorspülen, falls vorhanden). 1.
Kurzanweisung Die wichtigsten Handgriffe bei der Inbetriebnahme des Gerätes sind folgende: 1. Wasserzulauf- und -ablaufschlauch anschließen. 2. Netzstecker in die Steckdose einstecken. 3. Wasserhahn öffnen. 4. Wasserhärtebereich einstellen. 5. Klarspüler und Spezialsalz einfüllen. 6. Geschirrspülerkörbe füllen und wieder einschieben. 7. Reiniger dosieren. 8. Tür schließen. 9. EIN/AUS-Taste drücken. 10.Wenn gewünscht, Startzeit vorwählen. 11.Programmtaste drücken.
Pflege und Wartung Auf keinen Fall handelsübliche Möbelpflege- oder aggressive Reinigungsmittel verwenden. • Bedienteile des Geschirrspülers bei Bedarf nur mit einem weichen Lappen und warmem, klarem Wasser reinigen. • Innenbehälter, Türdichtung und Wasserzulauf gelegentlich auf Verschmutzungen kontrollieren und gegebenenfalls reinigen. ziehen. Reinigung der Siebe Die Siebe müssen regelmäßig kontrolliert und gereinigt werden. Verschmutzte Siebe beeinträchtigen das Spülergebnis 1.
Achtung: Ohne Siebe darf auf keinen Fall gespült werden. Niemals versuchen, die Sprüharme zu entfernen, da der Geschirrspüler dadurch Schaden nehmen kann. Eventuell verstopfte Düsen mit einem Zahnstocher reinigen. Edelstahlteile Bottich und Türinnenteil bestehen aus Edelstahl. Ein Rostanflug ist auf eisenhaltiges Wasser zurückzuführen: „Fremdrost“ ist auch bei Edelstahlteilen möglich. Mit feinkörnigem Putzmittel entfernen. Keine chlorhaltigen oder eisenhaltigen Scheuermittel verwenden.
Behebung kleiner Störungen Hinweise zur Behebung kleiner Störungen Wenn Sie unsere Ratschläge beachten, werden Sie immer Freude an Ihrer Geschirrspülmaschine haben. Sollte trotzdem eine Störung auftreten, so prüfen Sie bitte erst die nachfolgend angeführten Punkte, bevor Sie einen Fachmann zu Rate ziehen. Was ist, wenn... ...
• • • • • • • • Geschirrkörbe dürfen nicht überladen sein. Sind alle Siebe im Spülbehälterboden sauber bzw. richtig eingesetzt? Haben Sie das Reinigungsmittel richtig dosiert? Haben Sie Markenreinigungsmittel verwendet? Ist der Ablaufschlauch korrekt verlegt? Ist noch Spezialsalz im Salzvorratsbehälter? Ohne Spezialsalz wird das Wasser nicht enthärtet. Bei Wasserhärten über 4 °d können sich Kalkbeläge auf dem Geschirr bilden.
Hinweis! Bei allen anderen angezeigten Fehlern bitte zunächst das Spülprogramm abbrechen (Reset) und dann das Spülprogramm erneut anwählen und starten. Wird der Fehlercode wieder angezeigt, bitte den Kundendienst verständigen und den Fehlercode nennen. Beachten! Prüfung und Beseitigung vorstehender Fehlerursachen, die nicht durch ein defektes Gerät entstehen, muss Ihnen unser Kundendienst auch während der Garantiezeit berechnen.
Kundendienst Wichtig! Tritt eine Störung auf, so prüfen Sie bitte zunächst, ob Sie auch die in dieser Gebrauchsanweisung enthaltenen Hinweise und Ratschläge beachtet haben, bevor Sie den Kundendienst rufen. Störung Wenn Sie für eine Störung keinen Hinweis in der Gebrauchsanweisung finden, so verständigen Sie bitte unseren -- Technischen Kundendienst -„Profectis“. Die Kundendienst-Adressen der nächstgelegenen Servicestelle finden Sie im aktuellen Quelle-Katalog oder im Internet unter: Deutschland www.
Notizen 42
Technische Daten / Abmessungen Technische Daten: Fassungsvermögen Durchflusserhitzer Ablaufpumpe Umwälzpumpe Spannung 12 Maßgedecke 2035 Watt 30 Watt 150 Watt 220-230 Volt 50 Hz Sicherung, HLS-Automat 10 Ampere Gesamtanschluss 2100 Watt Wasserdruck mindestens 1 bar Wasserdruck maximal 10 bar Energieeffizienz Reinigungswirkung Trockenwirkung Bei Wasserdruck über 10 bar muss ein Druckminderventil vorgeschaltet werden. Auskunft erteilt der Kundendienst. Gerät nur senkrecht transportieren (z.B.
Hinweise für Prüfinstitute Die Prüfung nach EN 60704 muss bei voller Beladung mit dem Testprogramm (siehe Programmtabelle) durchgeführt werden. Die Prüfungen nach EN 50242 müssen mit vollem Salzbehälter des Wasserenthärters, mit vollem Vorratsbehälter für Klarspüler und mit dem Testprogramm (siehe Programmtabelle) durchgeführt werden. Volle Beladung: 12 Maßgedecke einschl. Servicegeschirr Halbvolle Beladung: 6 Maßgedecke einschl.
Programmwahl Wenn Ihr Geschirr so aussieht, wählen Sie ein Intensiv-Programm ein Normal- oder Bioprogramm ein Blitz- oder Glasprogramm 45
Programmübersicht Programm Geeignet für Taste Stark verschmutztes Ess- und Kochgeschirr mit angetrockneten Speiseresten, besonders Eiweiß und Intensiv 70° Stärke. mit Vorspülen Stark bis leicht verschmutztes Ess- und Kochgeschirr mit angetrockneten Speiseresten. AUTOMATIC Blitz 60° Frisch benutztes Geschirr ohne Töpfe, normal bis leicht verschmutzt.
Verbrauchswerte Programmablauf 1) Vorspülen Reinigen 2x Zwischenspülen Klarspülen Trocknen Durchschnittliche Programmdauer in Minuten bei Kaltwasseranschluss 2)3) Durchschnittlicher DurchschnittliEnergieverbrauch cher Wasserverin kWh bei Kaltbrauch in Litern wasseranschluss 2) 2) 110 - 120 1,75 - 1,95 23 - 25 90 - 110 1,00 - 1,50 13- 25 30 0,8 9 130 - 160 0,95 - 1,05 13 - 15 Reinigen 2x Zwischenspülen Klarspülen Trocknen 73 0,9 15 Vorspülen 12 < 0,1 4 Vorspülen Reinigen Zwischenspül
Gewährleistung Bei allen technischen Geräten von QUELLE beheben wir eventuelle Mängel im Rahmen der gesetzlichen Gewährleistungspflicht. Im Gewährleistungsfall wenden Sie sich bitte an eine QUELLE-Verkaufsstelle in Ihrer Nähe, an den Technischen Kundendienst PROFECTIS oder rufen Sie bei einer unserer Service-Hotlines an. Die Bedingungen und die Telefonnummern hierzu finden Sie im Service-Teil des QUELLEHauptkataloges. Geschirrspüler ProComfort 76680 i Integr. Modell alu-farbig Integr. Modell braun Integr.