Use and Care Manual

- 3 -
System installation
Shut o the main water line to your home. Install system to wall using the included SS bolts.
MAIN WATER SUPPLY VALVE
Attach your incoming supply line to the “IN” Port
on the system then attach the line going into your
home to the “OUT” port on the system.
Plastic ttings recommended. DO NOT solder.
Unwrap cartridges and drop into the correct hous-
ings, centering on the stand pipe in the bottom of
the housing. Stage 1 is closes to the “IN” port on
the system.
IN OUT
PR BUTTON
Install housing(s) onto the corresponding head and
turn clockwise until snug.
Hand Tighten. (DO NOT OVERTIGHTEN)
1) Locate nearest faucet and remove aerator.
2) Turn water supply on for 5 min. to ush lters.
3) Check system for leaks.
4) System is now ready.
IN
OUT
PR BUTTON
STAGE 1
HOUSING
STAGE 3
HOUSING
5 6
1 2
3 4