Use and Care Manual
CLOSE
CLOCKWISE
REPLACEMENT
FILTER
PART#: FC-9-PF
WS-P-REG-KITV2 Pre-Filter Instructions
Connect your incoming water hose to the
“IN” port and a garden hose to the “Out”
port on the WS-P-REG-KITV2 unit.
Install the dual filter onto the bottom cap
of the WS-P-REG-KITV2 unit, ensure the
filter is centered and leveled.
Install the housing over the filter and hand
tighten clockwise. Do not overtighten or
use the wrench tool.
Connect your incoming hose from the Pre-filter to the “IN” port
on the softener unit then connect another hose to the “OUT”
port on the softener unit.
Connect the other end of the hose from the softener unit to your
“IN” port on your recreational vehicle. Turn water on slowly to fill
your water storage tank.
OUT IN
WATER SUPPLY
TO RV /
BOAT
OUT IN
WATER SUPPLY
WS-P-REG-KITV2
PRE-FILTER /
REGENERATION KIT
TO RV / BOAT
OUT
CITY WATER
& TANK FILL
IN
OUT IN
2 31
54
Follow us on our social channels for
updates, news, oers and more!
WS-P-REG-KIT_V4
WWW.PROAQUAWATER.COM
Professional Water Filtration Systems
Scan the QR code to reorder
replacement filter #FC-9-PF