Use and Care Manual

www.ifilters.com
WS-P-REG-KIT Pre-Filter Instructions
Connect your incoming water hose to the “IN” port on the
WS-P-REG-KIT unit.
Install the dual filter onto the bottom cap of the WS-P-
REG-KIT unit, insure the filter is centered and leveled.
Connect your incoming hose from the Pre-filter to the “IN”
port on the softener unit then connect another hose to
the “OUT” port on the softener unit.
Connect a garden hose to the “OUT” port on the WS-P-
REG-KIT unit.
Install the housing over the filter and hand tighten clock-
wise. Do not overtighten or use the wrench tool.
Connect the other end of the hose from the softener unit
to your “IN” port on your recreational vehicle. Turn water
on slowly to fill your water storage tank.
INOUT
1
REPLACEMENT FILTER
PART#: PA-DC
3
WATER SUPPLY
TO RV /
BOAT
OUT IN
5
INOUT
2
CLOSE
CLOCKWISE
4
WATER SUPPLY
WS-P-REG-KIT
PRE-FILTER /
REGENERATION KIT
TO RV / BOAT
OUT
CITY WATER
& TANK FILL
IN
OUT IN
6