Specifications

34
speakers - sound
reinforcement
JBL Speakers - Sound Reinforcement – Unpowered
Unpowered
JBL AE Range - AM42 Mid/High Series
Premium performance, easy installation in a
mid/high only cabinet. The AM42 mid/high series
of installation speakers are dedicated mid/high
units. Fitted with JBL’s patented 6” CMCD
TM
horn
loaded mid range and a 1.5” throat compression
driver these cabinets are excellent for enhancing
speech reproduction and are available in
dispersions of 60 x 40 and 90 x 50 degrees.
Rated @ 125w continuous The AM42 mid/
high series delivers inteligability. AM4200/64,
AM4200/95.
See CD for model specifications
JBL SRX700 Series
Speakers
The advanced
technology of SRX700
series speakers
delivers the power
and performance that
you would expect from
the highest quality,
professional systems.
At the same time, JBL
innovation and design
have reduced system
weight and increased
performance. All this value is housed in rugged birch enclosures for years of
superb reliability.
SRX712M 12” 2-way utility speaker/stage monitor 800w, 90 x 50 degree
dispersion, can be hung vertically with optional Yoke attachment.
SRX715F 15” 2-way high power speaker 800w, 75 x 50 degree dispersion, comes
fitted with M10 haning points and 3 point flytrack.
SRX738F 18”3-way high power speaker 800w, 60 x 40 degree dispersion, 8”
horn loaded midrange, comes fitted with M10 haning points and 3 point flytrack.
SRX725F dual 15” 2-way high power speaker 1200w, 75 x 50 degree dispersion,
comes fitted with M10 haning points and 3 point flytrack.
Options SRX712M-YK Yoke attachment
SRX-FF3: 3x detachable flying fittings.
229-00009-01: 3 x 10 mm forged eyebolts.
See CD for model specifications
If you require top of the line, high
performance, conventional point
and shoot style loudspeakers JBL’s
SRX Series is king. Delivering
extremely high power handling and
SPL with crystal clear reproduction
they come fully equipped with
flying hardware. The JBL SRX
Series are ideally matched to the
Crown MAi Series amplifiers and
represent sensational value for
money as do the Crown amplifiers.
tips
guide
TECH-TIPS
How do I “bridge” the speaker outputs of my power amplifier?
All Crown amplifiers capable of bridge mode operation detail this in the user
guide. In bridge mode both channels of the amplifier are run in’push-pull’
configuration and the load (loudspeakers) are wired between +ve of amplifier
channel 1 and +ve of amplifier channel 2.
Bear in mind that a bridged load presents half the load impedance to each
channel. That is, a 4 ohm bridged load presents a 2 ohm load to each channel.
Normal minimum load impedance limits apply. In other words do not attempt
to run a 2 ohm load in bridge as this will present a 1 ohm load potentially
activating the amplifiers short circuit protection.
JBL AE Range - AC22 Series AC2212/XX
Premium quality general purpose 12” 2-way
12” + 1” HF•
250 watts continuous•
90° x 50°, 60° x 40° or •
100° x 100° dispersion
50Hz-19kHz•
95dB 1w/1m•
15 x M10 hang points•
548 x 355 x 352mm•
AC2212/64 – 18.1 kg •
AC2212/95 – 17.3 kg
AC2212/00 – 19.1 kg
JBL AE Range - AC22 Series AC2215/XX
Premium quality general purpose 15” 2-way
15” + 1” HF•
250 watts continuous•
90° x 50°, 60° x •
40° or 100° x 100°
dispersion
42Hz-19kHz•
97dB 1w/1m•
15 x M10 hang points•
637 x 422 x 504mm•
AC2215/64 – 24 kg •
AC2215/95 – 23.6 kg
AC2215/00 – 25 kg
JBL AE Range - AM42 Full Range Series
Premium performance, easy installation and
full range delivery. The AM42 full range series of
installation speakers offers a variety of versatile
cabinets to suit most applications. Available as
a 12” or 15” 2-way, the AM42 series comes in
dispersions of 60 x 40, 90 x 50 and 100 x 100 (12”
only) degrees. Rated @ 300w (12”) and 350w (15”)
continuous this series provides dynamic clarity
and SPL. AM4212/64, AM4212/95, AM4212/00,
AM4215/64, AM4215/95.
See CD for model specifications