Specifications

47
Clear-Com Communications – Wireless Systems
communications
wireless systems
Wireless Systems
ClearCom FreeSpeak
®
Wireless Systems
FreeSpeak
®
FreeSpeak
®
uniquely blends digital matrix technology with a locally distributed
wireless “network”. FreeSpeak
®
operates license-free in the 1.9 GHz frequency
band, free of interference with other wireless products such as PCs, talent
microphones, IFB and in-ear monitors. To this capability, the system adds broad
connectivity to party-line and digital matrix intercom systems. With FreeSpeak
®
,
beltpack-to-beltpack, beltpack-to-panel and group communication is finally
possible within a wireless system in full duplex.
Features
License-free 1.9 GHz DECT Operations•
20 wireless beltpacks in 1RU (v2 and up)•
Point-to-point and small group wireless communications•
Up to 6 communications routes per beltpack•
Frequency and channel hopping technology•
FreeSpeak
®
Integra
FreeSpeak
®
Integra uses the same unique cellular autoroaming technology as
FreeSpeak
®
.
This allows each beltpack to continuously detect and automatically select
the best connection to the matrix via the Active Antennas. Up to 40 beltpacks
can be used with the Eclipse matrix systems, FreeSpeak
®
Integra uses a Cell
Controller card, called EQue, fitted within the Eclipse matrix, achieving much
larger wireless system than FreeSpeak
®
. Integra provides connectivity between
the beltpacks and any number of ports within the matrix system, creating a true
seamless environment. FreeSpeak
®
Integra operates using a cellular network of
DECT 1.8-1.9GHz Active Antennae located around the production environment
which are connected directly to the Clear-Com Eclipse matrix.
Features
Cellular Architecture using low-cost Active Antennae•
Up to 40 users per Cell (depending on the environment)•
Up to 200 pre-set roles can be defined using system configuration software•
Up to 300 meters range under good conditions. Range can be extended by •
creating more cells (i.e. add additional Active Antennas)
Cellular Roaming – users can freely roam between cells, no need for •
frequency agility or changing channels
Patented DPA (Dynamic Port Allocation) technology select your position •
directly from the beltpack and talk as you roam, the matrix keeps you
connected
Full duplex 7kHz ‘commentator’ bandwidth for high-clarity, fatiguefree •
communications
Presenters or performers can also use • FreeSpeak
®
Integra as an earpiece
system
Quick & easy programming of audio routes from the beltpack or via standard •
software
Seamlessly integrates with Eclipse Omega and Median•
TECH-TIPS
What other systems is Clear-Com compatible with?
Clear-Com Party-Line products are compatible with Jands Ezicom as well as most other Party-line products and accessories on the market
straight out of the box. Other forms (like TW or Two Wire) require interfaces or TW compatible products provided by Clear-Com. Third party
headsets can also be used with the Clear-Com range, of which most are compatible. Some 3
rd
party headsets are sold with different
connectors or just bare ends. These must be wired to suit the Clear-Com product line. All Clear-Com branded headsets are supplied pre-
terminated ready to use.
Here are the standard pin outs for Clear-Com Party-Line products:
Party-Line:
Pin 1 --- Ground (shield)
Pin 2 --- Power
Pin 3 --- Audio
Headset:
Pin 1 --- Mic common
Pin 2 --- Mic hot
Pin 3 --- Headphone common
Pin 4 --- Headphone hot

PRESS:
New Clear-Com Tempest
Wireless System available
by time of print. Check CD
for the new specs!