User`s guide

TROUBLE SHOOTING

TRY THIS:

If the transmitter that is built inside the camera

head is in the ON position, the frequency that it puts out

interferers with the camera head frequency, and will

create wavy lines across your monitor. Inspect your pipe

and then locate to avoid picture distortion.

If your equipment is not equipped with a

transmitter built in the head or you have lines across

your screen while it is in the OFF position try changing

the video cable that goes from your reel to your monitor.

Any standard RCA adapter will work with your camera

system.

If the suggestions above have not eliminated

the problem there is a possibility that your MONITOR or

RECORDING DEVICE is dirty and needs to be cleaned.

See Monitor Instruction Booklet for cleaning instructions.

If problem persists please contact a repair technician

at South Coast Equipment.