User`s guide

TROUBLE SHOOTING

“NO SIGNAL” FLASHING ON MONITOR

Possible Problems:

-Wrong setting set on Monitor or Recording Device

-Faulty Video Cable

-Broken or damaged monitor or recording device

-Broken or loose connection in camera head or control box.

TRY THIS:

Read Monitor or Recording Device instruction

manual to make sure you are on the proper settings. Be sure

to check the batteries in all remote controls.

If you are on the proper settings plug the camera

system into another monitor or standard television that

accepts standard RCA connections. If you get a picture then

you know the problem is located in your monitor.

If you still have no picture on another monitor try

changing the video cable that goes from your reel to your

monitor. Any standard RCA adapter will work with your

camera system.

If you can play back on the Monitor or Recording

Device and none of the solutions above have worked, the

equipment will need to be diagnosed by a technician

please call the repair department at South Coast Equipment.