User`s guide

TIPS IN THE FIELD
8
1.) Run water down line to keep sapphire window clean
and clear. Jiggle the head a little bit in the water for best
clarity.
2.) If you stand too far back while pushing cable it may
cause the cable to kink. Give your self enough room to
push but not too much slack.
3.) DO NOT FORCE camera or cable down line. If you
feel it just doesn’t want to push stop pushing. It is for this
reason cable will snap or fail.
4.) In some cases it is necessary to give the camera a
little more momentum to go through certain areas of a
pipe. Back up the camera holding one hand at the entry
point and gathering up slack with the other as it feeds
from the reel. With the slack make a figure eight with
cable and twist back and fourth. This will pop the camera
through. Please see diagram below.