Owners manual

52612

Revised

8.21.07

17) Use the two holes in the passenger pivot bracket for a drill template and drill the cross mem-

ber flange with a 7/16” drill. Install the 7/16” x 1-1/4” bolts and torque to 50 ft. lbs.

18) Install I-Beams into pivot brackets and install pivot strut between brackets. Raising and or

lowering I-Beam will help align holes. Torque 9/16” bolts to 105 ft. lbs.

19) Remove factory bump stops and install the bump stop spacers 90-2144. (Illustration 4)

Factory bolt and 5/16” allen bolt will be used.