Owners manual

57095

Revised

2.28.2008

The following special tools will be required for the proper installation of this kit.

NOTE: The following parts are used in conjunction with this kit and must be ordered separately.

ITEM# DESCRIPTION QTY.

57589 Rear Block Kit 1

326006 ES3000 Shock Absorber (Rear) 2

618053 Front Strut 2

7213 Brake Line Kit 1

Pro Comp now offers a skid plate, traction bars, and a full line of All Terrain and Mud Terrain tires.

Pro Comp also offers a light bar for 95-97 Tacomas. Contact dealer for details.

BALL JOINT TOOL (SUPPLIED WITH KIT)

ALLEN SOCKET, 12MM

HOIST STANDS (2 REQUIRED)

TOYOTA #09610-20012

TOYOTA #09628-62011

BALL JOINT

PULLER

TIE ROD

PULLER

PLEASE NOTE:

Tire and wheel choice is crucial in assuring proper fit, performance, and the safety

of your Pro Comp equipped vehicle. For this application, a wheel not to exceed 8”

in width with a minimum backspacing of 3.25” must be used. Additionally, a

quality tire of radial design, not exceeding 32” tall X 11.5” wide is recommended.

Please note that the use of a 33” X 12.5” tire may require fender modification.

Violation of these recommendations will not be endorsed as acceptable by Pro

Comp Suspension and will void any and all warranties either written or implied.