Owners manual

7
57095
Revised
2.28.2008
the two (2) bolts that attach brake caliper to front spindle. Support the brake caliper securely so it cannot
swing freely.
6) Remove rotor (ILLUSTRATION 6) by using a snap ring expander and removing the snap ring.
(Some models may not have snap rings).
7) Using a strap, support the front drive axle from resting at full bind. Remove the cotter pin and
loosen nut located on upper front spindle. Disconnect using the ball joint puller. Toyota #09628-62011
(ILLUSTRATION 7).
8) Next, remove the cotter pin and nut located at tie rod ends. Using the tie rod puller, Toyota
ILLUSTRATION 6 ILLUSTRATION 5
ILLUSTRATION 7
BALL JOINT
PULLER
09628-62011
ILLUSTRATION 8
TIE ROD PULLER
09610-20012