Specifications

GP-4100 Series Hardware Manual
5-4
5.3 Replacing the Installation Gasket
The installation gasket provides protection against dust and moisture.
Installation Gasket Attachment Procedure
(1) Place the GP on a flat, level surface facing the display face downwards.
(2) Remove the gasket from the GP.
(3) Attach the new gasket to the GP. Be sure to insert the gasket into the GP’s groove so that the gasket’s
groove sides are vertical.
(4) Check that the gasket is attached correctly to the GP.
• A gasket which has been used for a long period of time may have scratches or dirt
on it, and could have lost much of its water resistance to be equivalent to IP65f /
NEMA #250 TYPE4X/13. Be sure to change the gasket at least once a year, or
when scratches or dirt become visible.
• The GP unit installation gasket’s model number is “ZC9WG31.”
GP Rear Face
Gasket Seam
Gasket
Installation
Groove