User manual

6–17
Chapter 6 – Initializing the LT
LT Series User Manual
Use this screen to enter the number of the screen that is initially displayed after
startup, the character size when the LT is in RUN mode, and other general screen
items.
INITIAL SCREEN NO.
This setting item specifies the file number of the screen that initially displays on
startup.
If the BIN option was selected for DATA TYPE OF SCREEN NO in the SYSTEM
SET UP screen
, enter a number from B1 to B8999; if BCD was the setup option,
enter a number from B1 to B1999.
ALARM MESSAGE
Use this setting item to set the character size for the ALARM MESSAGE, when
activated by the Alarm Bulletin.
1
2
4
When using single-byte characters:
V size=1 V size=2 V size=4
H size=1 H size=2 H size=4
16×8 pixels 32×16 pixels 64×32 pixels
When using double-byte characters:
V size=1 V size=2 V size=4
H size=1 H size=2 H size=4
16×16 pixels 32×32 pixels 64×64 pixels
ONLINE ERROR DISPLAY
Use this item to set up whether or not error messages display during RUN mode.
6.8 SET UP SCREEN