Owner`s manual

COMPUTER INSTRUCTION MANUAL
SPECIFICATIONS:
TIME--------------------------------------------------00:00 - 99:59 MIN:SEC
SPEED-------------------------------------------------0.0 – 999.9 KM/H OR ML/H
DISTANCE----------------------------------------------0.00 – 99.99 KM OR ML
CALORIES----------------------------------------------0.0 – 999.9 KCAL
ODOMETER(if have)-------------------------------------0.00 – 99.99 KM OR ML
PULSE(if have)----------------------------------------40 - 200 BEATS/MIN
KEY FUNCTION:
MODE/SELECT: To select the function you want. Hold the key for 4 seconds to
have all function values reset except the ODOMETER(TOTAL).
SET(if have): To input the target value by the key except the ODOMETER(TOTAL).
RESET/CLEAR(if have): To let the value reset except the ODOMETER(TOTAL).
OPERATION PROCEDURES:
AUTO ON/OFF .The monitor will be automatically shut off if there is no signal
coming in for 4 minutes. The monitor will be auto-powered when
start exercise or press the key.
FUNCTION:
<1>.TIME(TMR) Auto-memorize the workout time while exercising.
<2>.SPEED(SPD) Display the current speed.
<3>.DISTANCE(DST) Accumulate the distances while exercising.
<4>.CALORIES(CAL) Auto-memorize calories amount consumed while exercising.
<5>.ODOMETER(TOTAL) (if have) Display the total distances while exercising.
When the signal input, it start the value up on the original data.
The ODOMETER can’t be reset(by any key)except you replace battery once.
<6>.PULSE(PUL) (if have). Display the user’s heart rate per minute while
exercising. Remark: You have to hold on reaction planks with both hands.
<7>.SCAN Automatically scan through each function between ①TIME② SPEED(if have)③DISTANCE④
CALORIES⑤PULSE(if have)⑥ODOMETER(if have).
BATTERY If there is a possibility to see an improper display on the monitor, please replace the batteries to
have a good result. This monitor uses two “AA”or one“AAA” battery or one“1.5V” button battery. You can replace the
batteries at the same time.