Installation Instructions

On independently supported meters, PRO-FLEX

CSST can, in some locations, be routed through the

exterior wall and connected directly to the meter. Direct connections must provide a loop or slack in the

tubing to account for building settling and meter movement. Wall penetration must be properly sealed

following local code guidelines. NOTE: Building codes vary from area to area. Check with your local

utility and building codes to verify that meter connections are acceptable Always remember, local

jurisdiction will prevail.

Note: Prior to installing Pro-Flex® directly to a meter, ensure that the local utility allows this practice as

some utilities have regulations specifying meter attachments. Any exposed sections of stainless steel

piping must be wrapped with a silicone self-bonding tape. This is especially important with masonry and

wood frame contruction.