Installation Instructions

49
7.0 Technical Data Sheet
PRO-FLEX
®
C.S.S.T. SPEC / DATA SHEET
All system components are CSA approved
PRO-FLEX
®
TUBING
TUBING: ASTM A240/A240M-95A Type 304 Stainless Steel
COATING: Polyethylene Jacketing
PRO-FLEX
®
FITTINGS
MALE & FEMALE FITTINGS: C360 Brass
BRASS UNION FITTING: C360 Brass
REDUCER/INCREASERS: C360 Brass
TERMINATION PLATES: 1018 Low Carbon Steel
RETAINER RING: ASTM A240/A240M-95A Stainless Steel
WASHER RING: ASTM A240/A240M-95A Stainless Steel
SILICONE O-RING: Silicone Rubber, proprietary material
HI-TEMP GASKET: The gasket is made from a non-asbestos, proprietary
material. The gasket is compressed during the assembly
processes and should be inspected and replaced, if
necessary, when reusing the fitting.
PRO-FLEX
®
ACCESSORIES
STRIKER PLATES: Manufactured of 16 ga hardened steel
MANIFOLDS: Standard 150 lb. Malleable Iron Threaded Fittings Single
tee and multiple tee manifold assemblies.
VALVES: Ball valves which meet the ANS/ASM B 16.33 or
CGA 9.1-M88 as approved shutoff valves for use with
CSST tubing.
REGULATOR: Maxitrol 325-3 or 325-5A or equivalent.
METAL CONDUIT: Floppy-Flex
TM
manufactured by Tru-Flex Metal Hose Corp.
Galvanized strip-wound metal conduit used as a protection
device.
METAL CONDUIT: Floppy-Flex manufactured by Pro-Flex, LLC
Galvanized strip-wound metal conduit used as a protection
device.
248008 17498_TF_TrainingG.indd 53248008 17498_TF_TrainingG.indd 53 6/12/13 12:16 PM6/12/13 12:16 PM