User`s manual

22
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
s
ound system while you exercise, plug the included
audio cable into the jack on the console and into a
j
ack on your MP3 player or CD player; make sure
that the audio cable is fully plugged in.
Next, press the play button on your MP3 player or CD
player. Adjust the volume level using the Volume
increase and decrease buttons on the console or the
volume control on your MP3 player or CD player.
HOW TO CHANGE CONSOLE SETTINGS
The console features a user mode that keeps track of
elliptical information and allows you to personalize
console settings.
To select the user mode, hold down the Fan increase
button until the user mode information appears in the
display.
The time display will show the total number of hours
the elliptical has been used.
The distance display will show the total distance (in
miles or kilometers) that the pedals have moved.
The lower section of the display will show the status of
an iFit Live module. If a wireless iFit Live module is
connected, the display will show the words WIFI
MODULE. If a USB module is connected, the display
will show the words USB/SD MODULE. If no module
is connected, the display will show the words NO IFIT
MODULE.
The matrix will show the selected unit of measure-
ment. To change the unit of measurement, press the
Enter button. To view distance in kilometers, select
METRIC. To view distance in miles, select ENGLISH.
Press the decrease button next to the Enter button.
The display will show the contrast level of the display.
Press the Power Ramp increase and decrease but-
t
ons to adjust the contrast level.
I
f a wireless iFit Live module is connected, press the
decrease button next to the Enter button to view the
status of the personal trainer voice. To turn on or turn
off the voice of the personal trainer, press the Enter
button.
If a wireless iFit Live module is connected, press the
decrease button next to the Enter button to view the
default menu. The default menu will appear when you
turn on the power. Press the Enter button repeatedly
to select the manual main screen or the iFit Live main
screen as the default menu.
If a wireless iFit Live module is connected, press the
decrease button next to the Enter button to view the
status of an iFit Live module. Press the Enter button to
check the status of an iFit Live module. If a wireless
iFit Live module is connected, the display will show
the words CHECK WIFI STATUS. If a USB module is
connected, the display will show the words CHECK
USB STATUS. If no module is connected, the display
will show the words NO MODULE DETECTED.
If a wireless iFit Live module is connected, press the
decrease button next to the Enter button to transfer
data. To send and receive workouts, workout logs, and
updates, press the Enter button. When the process is
finished, the words TRANSFERS DONE will appear in
the display.
To exit the user mode, press the Fan increase button.