User`s manual

5.SYMPTOM:Thewalkingbelt slows when walked on

a. Use only a UL-tisted surge protector, rated at 15 amps, with a 14-gauge cord offive feet or less In length.

b. If the walking belt is ovedightened, treadmill performance may

decrease and the walking belt may be permanently damaged.

Remove the key and UNPLUG THE POWER CORD. Using the

allen wrench, tum both rear rolleradjustment bolts countemlock-

wise, 1/4 of a turn. When the walking belt Ispropedy tightened,

you should be able to lift each side of the walking belt 3 to 4

inches off the walking platform. Be careful to keep the walking

belt centered. PJugin the power cord, insertthe key and run the

treadmill for a few minutes. Repeat untilthe walking belt is prop-

erly tightened.

c. If the walking belt stillslows when walked on, please call our toll-

fre_'_HELPUNE.

Rear Roller Adjustment Bolts

6. SYMPTOM: The walking belt Is off-center

a. If the walking bolt has shifted to the left, first remove the key and

UNPLUG THE POWER CORD. Using the allen wrench, tum the

• left rear roller adjustment bolt clockwise, and the dght bolt coun-

terclockwise, 1/4 of a turn each. Be careful not to overtighten the

walking belt. Plug in the power cord, insert the key and run the

treadmill for a few minutes. Repeat untilthe walking belt is cen-

tered.

b. If the walking belt has shifted to the right, first remove the key

and UNPLUG THE POWER CORD. Using the allen wrench, turn

the left rear roller adjustment bolt counterclockwIse, and the right

bolt clockwise, 1/4 of a tum each. Be careful not to overtighten

the walking belt. Plug in the power cord, insert the key and run

the treadmill for a few minutes. Repeat until the walking belt is

centered.

7. SYMPTOM: The walking belt slips when walked on

a. If the walking belt slipswhen walked on, first remove the key and

UNPLUG THE POWER CORD. Using the allen wrench., tum

both rear roller adjustment bolts clockwise, 1/4 of a turn. When

the walking belt iscorrectly tightened, you should be able to lift

each side of the walking belt 3 to 4 inches off the walking plat-

form. Be careful to keep the walking belt centered. Plug in the

power cord, Insert the key and carefully walk on the treadmill for

a few minutes. Repeat until the walking belt is propedy tightened.