Operation Manual

13
7. If necessary, move the treadmill to the desired
location (see HOW TO MOVE THE TREADMILL
on page 29).
After the treadmill is placed in the location where
it will be used, make sure that the treadmill rests
firmly on the floor. If the treadmill rocks even
slightly, turn the Leveling Feet (100) as needed
until the rocking motion is eliminated.
7
8. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see page 31). To protect the floor
or carpet from damage, place a mat under the treadmill.
100
6
72
119
1
120
6. Identify the Right Inside Cover (120) and the
Right Outside Cover (119).
Hold the Right Inside Cover (120) against the
right Upright (116). Then, attach the Right
Outside Cover (119) to the Right Inside Cover
with three #8 x 1 1/2" Screws (1). Start all three
Screws, and then tighten them.
Attach the Left Inside Cover (not shown) and
the Left Outside Cover (not shown) in the
same way.
116