Operation Manual

19
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
17. Note: It may take a minute for the console
to be ready for use.
2. Select the main menu.
When you turn
on the power,
the main menu
will appear
after the
console boots
up. Touch the
home button in
the lower-left
corner of the screen (not shown here) to return to
the main menu at any time.
3. Start the walking belt and adjust the speed.
Touc h the Sta r t bu tton on t he s cree n or pres s th e
Run button on the console to start the walking
belt. You can also press the Manual button on the
console, and then touch the Resume button on
the screen. The walking belt will begin to move
at 1 mph. As you exercise, change the speed of
the walking belt as desired by pressing the Speed
increase and decrease buttons. Each time you
press one of the buttons, the speed setting will
change by 0.1 mph; if you hold down a button, the
speed setting will change in increments of 0.5 mph.
If you press one of the numbered Quick Speed/
Quick Pace buttons, the walking belt will gradually
change speed until it reaches the selected speed
setting.
To s t op t he w a lkin g be l t, p ress the Stop but t on. To
restart the walking belt, press the Run button.
4. Change the incline of the treadmill as desired.
To c h ange the incl ine o f t h e tr eadm i ll, pres s th e
Incline increase and decrease buttons or one of
the numbered Quick Incline buttons. Each time you
press one of the buttons, the incline will gradually
change until it reaches the selected incline setting.
Note: The first time you adjust the incline, you must
first calibrate the incline system (see step 4 on
page 27).
5. Monitor your progress with the displays.
The console
offers sev-
eral display
modes. The
display mode
that you select
will determine
which workout
information is
shown. To select the desired display mode, simply
flick or slide the screen. You can also view addi-
tional information by touching the red boxes on the
screen.
As you walk or run on the treadmill, the screen can
show the following workout information:
The incline level of the treadmill
The elapsed time
The time left (note: The manual mode does not
have a time left countdown)
The approximate number of calories you have
burned
The approximate number of calories you are
burning per hour
The distance that you have walked or run
The number of vertical feet you have climbed
The speed of the walking belt