User`s manual

7
3. Attach a Wheel (86) with the M10 x 50mm Bolt
(4) and M10 Nut (33) that you removed in step
1. Do not overtighten the Nut; the Wheel
must turn freely.
85
4
33
3
86
2. With the help of a second person, carefully tip
t
he treadmill onto its left side. Partially fold the
Frame (48) so that the treadmill is more stable;
d
o not fully fold the Frame yet.
Cut the tie securing the Upright Wire (77) to the
Base (85). Locate the tie in the indicated hole in
t
he Base, and use the tie to pull the Upright Wire
out of the hole.
Attach a Base Pad (81) to the Base (85) in the
location shown with a Base Pad Spacer (104)
and an M4.2 x 25mm Screw (2). Then, attach a
Base Pad in the location shown with only a M4.2
x 25mm Screw (2).
85
2
48
81
2
81
2
7
7
Tie
Hole
104