User`s manual

28
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
Key No. Qty. Description Key No. Qty. Description
101 40 M4 x 16mm Screw
102 6 M8 Jam Nut
103 12 M6 x 16mm Screw
104 1 Power Switch
105 20 M10 Split Washer
106 2 Shield Mount
107 6 M4 x 12mm TZP Screw
108 1 Right Sensor Wire
109 2 M8 x 45mm Button Bolt
110 1 Left Sensor Wire
111 1 Lower Wire
112 1 Audio Cable
113 1 Large Drive Belt
114 1 Left Pulse Grip/Controller
115 1 Front Left Upper Cap
116 1 Right Pulse Grip/Controller
117 8 M8 Split Washer
118 5 M8 x 18mm Washer
119 2 Medium Axle
120 1 Ramp Axle
121 4 Frame Bushing
122 11 M8 Nut
123 2 Pedal Knob
124 1 Left Pedal Bracket
125 1 Left Bracket Cover
126 1 M3.5 x 12mm Flat Head Screw
127 2 Adjustment Nut
128 1 M5 x 7mm Screw
129 1 Resistance Bracket
130 1 M5 Washer
131 1 Right Bracket Cover
132 2 Pedal Axle
133 1 Right Pedal Bracket
134 2 M10 x 25mm Washer
135 6 M10 Locknut
136 1 Small Leveling Foot
137 1 Power Cord
138 2 Small Pulley Snap Ring
139 1 J-bolt
140 2 Ramp Arm Bushing
141 2 Ramp Arm Clamp
142 1 M10 x 45mm Bolt
143 1 M10 x 35mm Bolt
144 2 M10 Square Nut
145 1 Front Right Stabilizer Tube
146 1 Right Track
147 1 Right Ramp Cap
148 4 M4 x 12mm Screw
149 2 Short Axle
150 1 Small Drive Belt
151 2 Pedal Knob Screw
152 1 Upper Wire
153 4 M10 x 22mm Washer
154 2 Spring Spacer
155 1 Strain Relief
156 4 Stand-off
157 2 Wire Clamp
158 2 Grommet
159 2 M4 x 25mm Screw
160 2 Shield Clip
161 2 M4 x 12.7mm Flange Screw
162 1 Extension Wire
* – Short Jumper Wire
* – Long Jumper Wire
* – Ground Wire
* – 15" Wire Harness
* – 25" Wire Harness
* – 80" Wire Harness
* – 90" Wire Harness
* – Reed Switch Extension Wire
* – Assembly Tool
* – Grease Packet
* – User’s Manual