User`s manual

10
9
9. Locate the Upper Wires (68) and the Receiver
Wire (101) inside the Handlebar (7).
W
hile a second person holds the Console (9)
near the Handlebar (7), connect the wires on
t
he Console to the Upper Wires (68) and to the
Receiver Wire (101). Then, insert the wires into
the Handlebar.
Tip: Avoid pinching the wires. Slide the
Console (9) onto the Handlebar (7).
Attach the Console (9) with four #8 x 3/4"
Screws (94).
10. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly
is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
9
7
6
8
101
94
Avoid pinching
the wires