User`s manual

7. Identify the Right Base Cover (91) and the Left

Base Cover (88). Slide the Right Base Cover

onto the Right Upright (85) as shown. Slide the

Left Base Cover onto the Left Upright (84).

6. Hold the Left Upright (84) against the Base (95).

Insert two 3/8" x 4" Screws (7) with two 3/8"

Star Washers (11) and a 3/8" x 1 1/2" Screw

(14) with a 3/8" Star Washer (11) into the Left

Upright.

Partially tighten the 3/8" x 4" Screws (7) until the

heads of the Screws touch the Left Upright (84);

do not fully tighten the Screws yet. Partially

tighten the 3/8" x 1 1/2" Screw (14).