www.proform.com Model No. PFEL19914.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.proformservice.com/ registration. CUSTOMER CARE For service at any time, go to www.proformservice.com. Or call 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–12 p.m. MT Please do not contact the store.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ASSEMBLY . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions. 12.
STANDARD SERVICE PLANS all 5
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® SMART STRIDER 935 elliptical. The SMART STRIDER 935 elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • In addition to the included tool(s), assembly requires the following tool(s): • Assembly requires two persons. one Phillips screwdriver • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.
3. If necessary, remove and discard the shipping supports and the shipping screws attached to the front of the Frame (1). 3 84 73 With the help of another person, place some packing inserts from the packing material under the Frame (1) so that the Frame is lifted off the floor. Have another person hold the elliptical to prevent it from moving from side to side until this step is completed. Attach the Front Stabilizer (73) to the Frame (1) with two M10 x 120mm Screws (84).
5. Rotate the Right Upper Body Arm (9) to the position shown. 5 Attach the Right Upper Body Arm (9) to the Right Upper Body Leg (6) with an M10 x 50mm Screw (95). 9 20 78 Next, tighten the indicated M10 x 45mm Screw (78). Then, press the Upper Body Arm Cover (20) downward and turn it so that it is flush with the Right Leg Front and Rear Covers (11, 15). 11, 15 95 6 Repeat this step on the other side of the elliptical. 6. Make sure that all parts of the elliptical are properly tightened.
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR The heart rate monitor consists of a chest strap and a sensor. Insert the tab on one end of the chest strap into the hole in one end of the sensor as shown. Then, press the end of the sensor under the buckle on the chest strap. The tab should be flush with the front of the sensor.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may be used to connect the power cord to a 2-pole receptacle as shown at the right if a properly grounded outlet is not available. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The power cord has a plug with a grounding pin.
HOW TO MOVE THE ELLIPTICAL HOW TO ADJUST THE POSITIONS OF THE PEDALS Due to the size and weight of the elliptical, moving it requires two persons. First, loosen the upright knob. Next, pull the upright knob, pull the upright backward until the latch stops the upright, and then release the upright knob. Next, pull the upright forward slightly, lift the latch, and then lower the upright to the folded position.
HOW TO EXERCISE ON THE ELLIPTICAL See HOW TO MOVE THE ELLIPTICAL on page 12 and lower the upright to the folded position. To mount the elliptical, hold the handlebars or the upper body arms and step onto the pedal that is in the lower position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedals can turn in either direction.
CONSOLE DIAGRAM MAKE YOUR FITNESS GOALS A REALITY WITH IFIT.COM Upload your workout results to the iFit cloud and track your accomplishments. With your new iFit-compatible fitness equipment, you can use an array of features on iFit.com to make your fitness goals a reality: Set calorie, time, or distance goals for your workouts. Exercise anywhere in the world with customizable Google Maps. Watch high-definition videos with simulated workouts.
FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The advanced console offers an array of features designed to make your workouts more effective and enjoyable. IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. The console features revolutionary iFit technology that enables the console to communicate with your wireless network.
HOW TO USE THE TOUCH SCREEN 2. Check for firmware updates. The console features a tablet with a full-color touch screen. The following information will help you become familiar with the tablet’s advanced technology: First, see step 1 on page 22 and step 2 on page 24 and select the maintenance mode. Then, see step 3 on page 24 and check for firmware updates. • The console functions similarly to other tablets.
HOW TO USE THE MANUAL MODE Note: After you press a button, it will take a moment for the frame to reach the selected incline level. 1. Touch the screen or press any button on the console to turn on the console. 4. Follow your progress. See HOW TO TURN ON THE POWER on page 15. The console offers several display modes. The display mode that you select will determine which workout information is shown. 2. Select the main menu.
5. Measure your heart rate if desired. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. To use the chest heart rate monitor, see page 10. To use the handgrip heart rate monitor, follow the instructions below. IMPORTANT: If you use both heart rate monitors at the same time, the console will not display your heart rate accurately. 6.
HOW TO USE AN ONBOARD WORKOUT IMPORTANT: The target cadence is intended only to provide motivation. Your actual pedaling speed may be slower than the target cadence. Make sure to pedal at a speed that is comfortable for you. 1. Begin pedaling or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 15.
HOW TO USE A SET-A-GOAL WORKOUT manually override the setting by pressing the Resistance buttons or the Incline buttons. If you press a Resistance button, you can then manually control the resistance (see step 3 on page 17). If you press an Incline button, you can then manually control the incline (see step 3 on page 17). To return to the programmed resistance and/or incline settings of the workout, touch the Follow Workout button. 1.
HOW TO USE AN IFIT WORKOUT For more information about the iFit workouts, please see www.iFit.com. Note: To use an iFit workout, you must have access to a wireless network (see HOW TO USE THE WIRELESS NETWORK MODE on page 25). An iFit account is also required. When you select an iFit workout, the screen will show the name of the workout and the estimated duration of the workout based on your pedaling cadence. The screen will also show the approximate number of calories you will burn during the workout.
HOW TO USE THE EQUIPMENT SETTINGS MODE 6. Turn on or turn off the display demo mode. Note: Some of the features described may not be enabled. Occasionally, a firmware update may cause your console to function slightly differently. The console features a display demo mode, designed to be used if the elliptical is displayed in a store. While the demo mode is turned on, the screen will show a preset presentation when the elliptical is not in use. 1. Select the settings main menu.
Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985. When you select an update time, you must also enable automatic console updates (see step 4). IMPORTANT: You must still unplug the power cord after using your elliptical.
HOW TO USE THE MAINTENANCE MODE IMPORTANT: Keep pets, feet, and other objects away from the elliptical while the incline is calibrating. Note: Some of the features described may not be enabled. Occasionally, a firmware update may cause your console to function slightly differently. 5. Calibrate the screen. 1. Select the settings main menu. If the screen is not properly calibrated, it will be difficult for you to touch the correct buttons on the screen.
HOW TO USE THE WIRELESS NETWORK MODE name (SSID). If your network has a password, you will also need to know the password. The console features a wireless network mode that allows you to set up a wireless network connection. An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel button to return to the list of networks. If the network has a password, touch the password entry box.
HOW TO USE THE SOUND SYSTEM HOW TO USE THE INTERNET BROWSER To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE M4 x 16mm Screws (not shown) from the Top Shield (37), and then use a flat screwdriver to pry the Top Shield upward off the elliptical. Inspect and tighten all parts of the elliptical regularly. Replace any worn parts immediately. Look into the access opening and locate the Reed Switch (58). Rotate the Pulley (66) until a Magnet (41) is aligned with the Reed Switch. To clean the elliptical, use a damp cloth and a small amount of mild soap.
HOW TO ADJUST THE DRIVE BELT See EXPLODED DRAWING C on page 35. Remove all of the M4 x 16mm Screws (61) and M4 x 38mm Screws (64) from the Left and Right Shields (44, 45). Make sure to note which size Screws come from which holes. Then, carefully remove the Left Shield. If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest setting, the drive belt may need to be adjusted.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 6 1 1 2 1 1 4 1 2 2 1 1 4 2 2 1 10 1 1 2 1 2 1 1 2 1 2 1 1 1 2 4 1 2 Model No. PFEL19914.0 R0514A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 1 1 4 1 1 1 1 1 2 1 1 2 14 1 1 2 2 1 1 1 Description Key No. Qty.
25 79 70 66 107 60 71 84 53 43 74 61 99 61 106 115 51 24 97 41 103 68 91 96 103 100 41 99 82 98 38 50 77 72 47 61 99 46 4 57 56 52 61 94 48 54 71 40 79 38 58 7 99 61 61 82 60 25 1 112 81 93 43 55 102 42 74 61 83 17 61 33 59 28 55 132 17 132 104 61 83 98 73 98 108 59 118 75 132 33 61 105 125 114 61 84 75 112 81 98 48 77 109 84 EXPLODED DRAWING A Model No. PFEL19914.
87 81 85 3 61 69 80 63 88 62 61 2 122 67 61 120 61 86 90 89 16 14 124 12 61 21 5 8 10 92 101 19 29 20 127 39 18 29 33 98 121 116 30 81 61 75 130 131 20 128 126 75 13 95 9 61 32 49 117 31 23 61 76 123 33 119 15 17 61 10 61 129 23 33 61 76 6 78 17 22 76 33 11 EXPLODED DRAWING B Model No. PFEL19914.
26 113 61 61 27 113 64 61 36 64 113 44 113 64 61 61 65 61 64 45 65 37 35 64 113 64 34 65 65 113 65 113 36 111 61 113 65 26 61 61 35 65 61 61 110 EXPLODED DRAWING C Model No. PFEL19914.
ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual.
