Automatic money detector English User manual MONIRON DEC series www.pro-intell.
English Corporation PRO INTELLECT TECHNOLOGY represents the automatic detector MONIRON DEC. The present detector automatically carries out a complex analysis for authentication and gives a well-defined result, what enables operator to test banknotes quickly, without any special knowledge about false banknote protection types.
2 Appearance 2 6 5 3 4 1 Figure 1 English 7 Figure 2 1. Receiving tray. 2. Banknote supply mode indicators. The upper indicator corresponds with forward supply mode, the lower one- backward supply. 3. ‘ADD/DIR’ button switches on ‘Add’/ off ‘onE’ mode of summing up nominal values. If hold ‘ADD/DIR’ button for 3 seconds, banknote supply mode switches (forward/backward). 4. ‘CLR’ button. Clears display values. Holding the button down within 3 seconds allows to switch on/off the detector. 5.
English Figure 4 MONIRON DEC MULTI ‘ADD/DIR’ button for 3 seconds. The upper green indicator corresponds to forward mode and the lower indicator – backward mode. 4. The detector has 2 operation modes: ‘onE’ one banknote verification mode and ‘Add’ nominal valued summing up mode. The upper display shows the quantity of counted banknotes in ‘Add’ mode, while in ‘onE’ mode the display value is equal to 1.
MONIRON DEC EUR Orientation to: Center Left edge Figure 5 Correct orientation of notes English Right edge Figure 6 Incorrect orientation of notes The detector will determine the nominal of authentic banknote (in ‘Add’ mode it will add its nominal to the total sum). Attention! If a banknote is placed in receiving tray incorrectly, the banknote is not detected as an authentic one and any error code is displayed. In case of error check banknote orientation (Fig.
Error Code En EI/Ei English EF Solution Magnetic marks location error An error of strong / weak infra-red tags location Banknote image detection error 1. Check the correctness of placement banknote into detector (see Fig.4) 2. Count the banknote again.
Manufacturer guarantees proper functioning of the device during warranty period since the date of sale under condition of compliance with maintenance and storage procedures described in this manual. After unpacking the device please keep the package and technical description. Warranties are canceled in case the device was not transported in the original package or maintenance procedures were violated.
© PRO INTELLECT TECHNOLOGY / www.pro-intell.
