INSTRUCTIONS FOR USE Pro-Ject Amp Box DS
Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Remote power on The amplifier can be switched on & off via a special connection from the Pro-Ject Pre Box SE via the 2,5mm socket marked Trigger IN. + ) is supplied for this purpose. Longer cables are available as A 45cm long power-on cable (polarity accessories. The remote power-on signal can be relayed to further units via the Trigger OUT socket. To switch on from standby or to standby The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby mode.
