INSTRUCTIONS FOR USE Pro-Ject Amp Box Mono
Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors Input by pass output Out ! Make all connections whilst the amplifier is disconnected from the power supply. Connection to the preamplifier The socket marked Input is for connecting the cables from your pre-amp or AV processor.
Technical specifications Pro-Ject Amp Box Mono Power output: Frequency response: Noise floor: THD: Gain: Pre in: Input sensitivity: Input impedance: Pre out: Speaker connector: Trigger: Trigger in and out: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 28W/40W at 8ohms/4ohms 5Hz - 20kHz (+ 0dB, - 0,5dB) > -100dB (A weighted) < 0,05% at 10W 22dB 1 RCA/Phono socket 1V 47kohms 1 RCA/Phono socket 4mm ∅ banana plugs, spades connectors or naked wire 12V DC switching volt
