INSTRUCTIONS FOR USE Pro-Ject Amp Box RS
Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Mains power connection Connect the low voltage plug from the power supply to the 2x48V= socket of the amplifier before connecting the power supply to the mains. To switch on from standby or to standby The switch on the left hand side of the front panel turns the unit on or back into standby. The blue LED above the stand-by switch shows that the unit is switched on. After switching on, the tubes need a short time to reach the correct operating temperature.
