INSTRUCTIONS FOR USE Pro-Ject Amp Box SE
Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors IN Trigger OUT 2x49V Left Right ! Make all connections whilst the amplifier is disconnected from the power supply.
Technical specifications Pro-Ject Amp Box SE Power output: Frequency response: Channel separation: Noise floor: THD: Gain: Pre in: Input sensitivity: Input impedance: Speaker connectors: Trigger: Trigger in and out: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 2 x 80W/125W at 8ohms/4ohms (both channels driven) 10Hz - 50kHz (+0dB, -3) > 40dB at 20kHz > -90dB (A weighted) < 0,1% at 90W 26dB 1 pair RCA/Phono sockets 1,5V 100kohms 4mm ∅ banana plugs, spades connector
